Project: 10001 (Run 388, Clone 2, Gen 0)
Moderators: Site Moderators, FAHC Science Team
Project: 10001 (Run 388, Clone 2, Gen 0)
I don't see this WU in the Project summary and FahMon reports it as unknown. It downloaded FahCore_b4.exe, which I didn't have until now. Is there any information about this one?
All clients stopped due to Stanford's upcoming September 2011 decision
-
- Posts: 823
- Joined: Tue Mar 25, 2008 12:45 am
- Hardware configuration: Core i7 3770K @3.5 GHz (not folding), 8 GB DDR3 @2133 MHz, 2xGTX 780 @1215 MHz, Windows 7 Pro 64-bit running 7.3.6 w/ 1xSMP, 2xGPU
4P E5-4650 @3.1 GHz, 64 GB DDR3 @1333MHz, Ubuntu Desktop 13.10 64-bit
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
The project summary page is now split up into general and beta projects, and the default page only shows general projects. You should see three links in the upper-left corner of the screen under the big bold "Currently Running Projects" that change which set you're viewing. The new Protomol-based projects are listed as beta.
FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
Ah, I see what you mean about the other page summaries. Thanks. Wow, it's only a 50 pointer.
It's to bad about FahMon, it would appear that it is never going to get updated and not for just the reason expressed in this thread.
It's to bad about FahMon, it would appear that it is never going to get updated and not for just the reason expressed in this thread.
All clients stopped due to Stanford's upcoming September 2011 decision
-
- Site Moderator
- Posts: 6435
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
If you want to know more about this core and projects, I wrote a little something : The Protomol core unveiled in Advmethods
-
- Posts: 1579
- Joined: Fri Jun 27, 2008 2:20 pm
- Hardware configuration: Q6600 - 8gb - p5q deluxe - gtx275 - hd4350 ( not folding ) win7 x64 - smp:4 - gpu slot
E6600 - 4gb - p5wdh deluxe - 9600gt - 9600gso - win7 x64 - smp:2 - 2 gpu slots
E2160 - 2gb - ?? - onboard gpu - win7 x32 - 2 uniprocessor slots
T5450 - 4gb - ?? - 8600M GT 512 ( DDR2 ) - win7 x64 - smp:2 - gpu slot - Location: The Netherlands
- Contact:
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
You do know fahMON can be set to the other pages manually, and it has always been that way?FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
-
- Posts: 823
- Joined: Tue Mar 25, 2008 12:45 am
- Hardware configuration: Core i7 3770K @3.5 GHz (not folding), 8 GB DDR3 @2133 MHz, 2xGTX 780 @1215 MHz, Windows 7 Pro 64-bit running 7.3.6 w/ 1xSMP, 2xGPU
4P E5-4650 @3.1 GHz, 64 GB DDR3 @1333MHz, Ubuntu Desktop 13.10 64-bit
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
Now that you mention it, I think I have seen that, but I never paid much attention.MtM wrote:You do know fahMON can be set to the other pages manually, and it has always been that way?FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
What other pages?MtM wrote:You do know fahMON can be set to the other pages manually, and it has always been that way?FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
All clients stopped due to Stanford's upcoming September 2011 decision
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
A small clarification about the comment I made earlier about the WU only being 50 points. I actually prefer these smaller WUs because they make you feel as though you are actually getting something accomplished in a day, rather than having to wait 3 or 4 days for a single result.
All clients stopped due to Stanford's upcoming September 2011 decision
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
Am I the only one that doesn't see the links at the top of the Project Summary page?
All clients stopped due to Stanford's upcoming September 2011 decision
-
- Site Moderator
- Posts: 6435
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
They have been removed, beta information are only available to Beta Team members. These links shouldn't have been added, so it's fixed now.
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
Okay, I thought maybe I had accidentally changed a browser setting or something and that's why I couldn't see them.
Thanks all.
Thanks all.
All clients stopped due to Stanford's upcoming September 2011 decision
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
'p1000?'s aren't betas anymore anyway
--
I'm counting for science.
Points just make me sick.
I'm counting for science.
Points just make me sick.
-
- Posts: 1024
- Joined: Sun Dec 02, 2007 12:43 pm
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
Right. They appear on the regular psummary, though you have to scroll a long way to find them.whynot wrote:'p1000?'s aren't betas anymore anyway
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
Both of you must not be using the Project Summary link at the top of the forums. The highest number there is 6316.
I thought this was solved with toTOW's post. Now it's confusing again.
I thought this was solved with toTOW's post. Now it's confusing again.
All clients stopped due to Stanford's upcoming September 2011 decision
Re: Project: 10001 (Run 388, Clone 2, Gen 0)
Tynat, there currently is no more ProtoMol work available for the moment. They were listed properly last night so I suspect the server ran out of work early this morning.