Project: 10001 (Run 388, Clone 2, Gen 0)

Moderators: Site Moderators, FAHC Science Team

Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Tynat »

I don't see this WU in the Project summary and FahMon reports it as unknown. It downloaded FahCore_b4.exe, which I didn't have until now. Is there any information about this one?
All clients stopped due to Stanford's upcoming September 2011 decision
Zagen30
Posts: 823
Joined: Tue Mar 25, 2008 12:45 am
Hardware configuration: Core i7 3770K @3.5 GHz (not folding), 8 GB DDR3 @2133 MHz, 2xGTX 780 @1215 MHz, Windows 7 Pro 64-bit running 7.3.6 w/ 1xSMP, 2xGPU

4P E5-4650 @3.1 GHz, 64 GB DDR3 @1333MHz, Ubuntu Desktop 13.10 64-bit

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Zagen30 »

The project summary page is now split up into general and beta projects, and the default page only shows general projects. You should see three links in the upper-left corner of the screen under the big bold "Currently Running Projects" that change which set you're viewing. The new Protomol-based projects are listed as beta.

FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
Image
Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Tynat »

Ah, I see what you mean about the other page summaries. Thanks. Wow, it's only a 50 pointer.

It's to bad about FahMon, it would appear that it is never going to get updated and not for just the reason expressed in this thread.
All clients stopped due to Stanford's upcoming September 2011 decision
toTOW
Site Moderator
Posts: 6435
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by toTOW »

If you want to know more about this core and projects, I wrote a little something : The Protomol core unveiled in Advmethods
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
MtM
Posts: 1579
Joined: Fri Jun 27, 2008 2:20 pm
Hardware configuration: Q6600 - 8gb - p5q deluxe - gtx275 - hd4350 ( not folding ) win7 x64 - smp:4 - gpu slot
E6600 - 4gb - p5wdh deluxe - 9600gt - 9600gso - win7 x64 - smp:2 - 2 gpu slots
E2160 - 2gb - ?? - onboard gpu - win7 x32 - 2 uniprocessor slots
T5450 - 4gb - ?? - 8600M GT 512 ( DDR2 ) - win7 x64 - smp:2 - gpu slot
Location: The Netherlands
Contact:

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by MtM »

FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
You do know fahMON can be set to the other pages manually, and it has always been that way?
Zagen30
Posts: 823
Joined: Tue Mar 25, 2008 12:45 am
Hardware configuration: Core i7 3770K @3.5 GHz (not folding), 8 GB DDR3 @2133 MHz, 2xGTX 780 @1215 MHz, Windows 7 Pro 64-bit running 7.3.6 w/ 1xSMP, 2xGPU

4P E5-4650 @3.1 GHz, 64 GB DDR3 @1333MHz, Ubuntu Desktop 13.10 64-bit

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Zagen30 »

MtM wrote:
FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
You do know fahMON can be set to the other pages manually, and it has always been that way?
Now that you mention it, I think I have seen that, but I never paid much attention.
Image
Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Tynat »

MtM wrote:
FahMon is probably still reading off of the default page, which is why the beta projects can't be found by it.
You do know fahMON can be set to the other pages manually, and it has always been that way?
What other pages?
All clients stopped due to Stanford's upcoming September 2011 decision
Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Tynat »

A small clarification about the comment I made earlier about the WU only being 50 points. I actually prefer these smaller WUs because they make you feel as though you are actually getting something accomplished in a day, rather than having to wait 3 or 4 days for a single result.
All clients stopped due to Stanford's upcoming September 2011 decision
Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Tynat »

Am I the only one that doesn't see the links at the top of the Project Summary page?
All clients stopped due to Stanford's upcoming September 2011 decision
toTOW
Site Moderator
Posts: 6435
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by toTOW »

They have been removed, beta information are only available to Beta Team members. These links shouldn't have been added, so it's fixed now.
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Tynat »

Okay, I thought maybe I had accidentally changed a browser setting or something and that's why I couldn't see them.

Thanks all.
All clients stopped due to Stanford's upcoming September 2011 decision
whynot
Posts: 91
Joined: Wed Mar 26, 2008 9:02 pm
Location: Kyiv, Ukraine

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by whynot »

'p1000?'s aren't betas anymore anyway
--
I'm counting for science.
Points just make me sick.
codysluder
Posts: 1024
Joined: Sun Dec 02, 2007 12:43 pm

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by codysluder »

whynot wrote:'p1000?'s aren't betas anymore anyway
Right. They appear on the regular psummary, though you have to scroll a long way to find them.
Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Tynat »

Both of you must not be using the Project Summary link at the top of the forums. The highest number there is 6316.

I thought this was solved with toTOW's post. Now it's confusing again.
All clients stopped due to Stanford's upcoming September 2011 decision
Tobit
Posts: 342
Joined: Thu Apr 17, 2008 2:35 pm
Location: Manchester, NH USA

Re: Project: 10001 (Run 388, Clone 2, Gen 0)

Post by Tobit »

Tynat, there currently is no more ProtoMol work available for the moment. They were listed properly last night so I suspect the server ran out of work early this morning.
Post Reply