5101 run 0 Clone 149 Gen 57 { 2 Million steps?}

dschief · Post by **dschief** » Thu Jan 29, 2009 4:31 pm

This is taking 31 min per % ; Is it ok? It's worth 2165 points! The dead -line is 5 days, so it looks like it will finish under the wire.

ChasR · Post by **ChasR** » Thu Jan 29, 2009 5:25 pm

It's a normal p5101.

dschief · Post by **dschief** » Thu Jan 29, 2009 7:34 pm

It seems to be way under pointed, by comparison,the 1920 point wu's I can finish in less than a day. this one "should"
be worth close to 4,000

7im · Post by **7im** » Thu Jan 29, 2009 7:35 pm

On what kind of hardware?

dschief · Post by **dschief** » Thu Jan 29, 2009 7:55 pm

C2D 6400 2.4 Ghz. 2 gig ram; normal wu's usually take 12 1/2 to 13 min per %; This 5101 is taking over 30 min per %

any rate the point boost is only 12.76 % while processing time is double. The minimum value should be 3840

Post by **toTOW** » Thu Jan 29, 2009 8:01 pm

It's an A1 WU ... not an A2. That's why it's so slow.

dschief · Post by **dschief** » Thu Jan 29, 2009 8:12 pm

Just checked, Have 3 { 5102's } running in addition to the 5101, this is really going to kick the snot out of my PPD

Folding Forum

5101 run 0 Clone 149 Gen 57 { 2 Million steps?}

5101 run 0 Clone 149 Gen 57 { 2 Million steps?}

Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}

Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}

Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}

Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}

Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}

Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}