5793 (Run 9, Clone 286, Gen 5) ran to 100% and then failed

Moderators: Site Moderators, FAHC Science Team

Post Reply
MtM
Posts: 1579
Joined: Fri Jun 27, 2008 2:20 pm
Hardware configuration: Q6600 - 8gb - p5q deluxe - gtx275 - hd4350 ( not folding ) win7 x64 - smp:4 - gpu slot
E6600 - 4gb - p5wdh deluxe - 9600gt - 9600gso - win7 x64 - smp:2 - 2 gpu slots
E2160 - 2gb - ?? - onboard gpu - win7 x32 - 2 uniprocessor slots
T5450 - 4gb - ?? - 8600M GT 512 ( DDR2 ) - win7 x64 - smp:2 - gpu slot
Location: The Netherlands
Contact:

5793 (Run 9, Clone 286, Gen 5) ran to 100% and then failed

Post by MtM »

Code: Select all

[21:15:22] Completed 96%
[21:18:29] Completed 97%
[21:21:34] Completed 98%
[21:24:35] Completed 99%
[21:27:36] Completed 100%
[21:27:36] mdrun_gpu returned 
[21:27:36] Going to send back what have done -- stepsTotalG=20000000
[21:27:36] Work fraction=1.0000 steps=20000000.
[21:27:40] logfile size=26884 infoLength=26884 edr=0 trr=25
[21:27:40] - Writing 27422 bytes of core data to disk...
[21:27:40] Done: 26910 -> 5781 (compressed to 21.4 percent)
[21:27:40]   ... Done.
[21:27:41] 
[21:27:41] Folding@home Core Shutdown: UNSTABLE_MACHINE
[21:27:44] CoreStatus = 7A (122)
[21:27:44] Sending work to server
[21:27:44] Project: 5793 (Run 9, Clone 286, Gen 5)
[21:27:44] - Read packet limit of 540015616... Set to 524286976.
I think this is not an unstable machine issue as the system has been consistent.
Post Reply