Project: 6512 (Run 10, Clone 160, Gen 58) EUE

Moderators: Site Moderators, FAHC Science Team

Post Reply
GreyWhiskers
Posts: 660
Joined: Mon Oct 25, 2010 5:57 am
Hardware configuration: a) Main unit
Sandybridge in HAF922 w/200 mm side fan
--i7 2600K@4.2 GHz
--ASUS P8P67 DeluxeB3
--4GB ADATA 1600 RAM
--750W Corsair PS
--2Seagate Hyb 750&500 GB--WD Caviar Black 1TB
--EVGA 660GTX-Ti FTW - Signature 2 GPU@ 1241 Boost
--MSI GTX560Ti @900MHz
--Win7Home64; FAH V7.3.2; 327.23 drivers

b) 2004 HP a475c desktop, 1 core Pent 4 HT@3.2 GHz; Mem 2GB;HDD 160 GB;Zotac GT430PCI@900 MHz
WinXP SP3-32 FAH v7.3.6 301.42 drivers - GPU slot only

c) 2005 Toshiba M45-S551 laptop w/2 GB mem, 160GB HDD;Pent M 740 CPU @ 1.73 GHz
WinXP SP3-32 FAH v7.3.6 [Receiving Core A4 work units]
d) 2011 lappy-15.6"-1920x1080;i7-2860QM,2.5;IC Diamond Thermal Compound;GTX 560M 1,536MB u/c@700;16GB-1333MHz RAM;HDD:500GBHyb w/ 4GB SSD;Win7HomePrem64;320.18 drivers FAH 7.4.2ß
Location: Saratoga, California USA

Project: 6512 (Run 10, Clone 160, Gen 58) EUE

Post by GreyWhiskers »

Another EUE "Gromacs cannot continue further". This is two in a row on my HP a475c running a standard CPU Systray client, secondary to running a GPU client on my HD4670 AGP. I've been running the GPU client since the first of August 2010 on the HD4670 with no issues other than an odd HW instability when I try to overclock too much, but it's been stable for months now. I've not had any hardware issues with the CPU client, which I've been running for about a month now with some 35 successful work units (I know - pretty pitiful production - but I can get about one WU a day from the CPU for free - about 80 points - with no affect at all on the 1240 or so PPD for the GPU client)

As I said, it's two in a row for the standard CPU client - but with different WUs - the other EUE was on Project: 6509 (Run 15, Clone 48, Gen 51).

Code: Select all

[04:42:12] - Preparing to get new work unit...
[04:42:12] + Attempting to get work packet
[04:42:12] - Will indicate memory of 2047 MB
[04:42:12] - Connecting to assignment server
[04:42:12] Connecting to http://assign.stanford.edu:8080/
[04:42:13] Posted data.
[04:42:13] Initial: 40AB; - Successful: assigned to (171.64.65.62).
[04:42:13] + News From Folding@Home: Welcome to Folding@Home
[04:42:13] Loaded queue successfully.
[04:42:13] Connecting to http://171.64.65.62:8080/
[04:42:13] Posted data.
[04:42:13] Initial: 0000; - Receiving payload (expected size: 420183)
[04:42:14] - Downloaded at ~410 kB/s
[04:42:14] - Averaged speed for that direction ~742 kB/s
[04:42:14] + Received work.
[04:42:14] Trying to send all finished work units
[04:42:14] + No unsent completed units remaining.
[04:42:14] + Closed connections

[04:42:19] + Processing work unit
[04:42:19] Core required: FahCore_78.exe
[04:42:19] Core found.
[04:42:19] Working on queue slot 08 [December 21 04:42:19 UTC]
[04:42:19] + Working ...
[04:42:19] - Calling '.\FahCore_78.exe -dir work/ -suffix 08 -nocpulock -checkpoint 15 -verbose -lifeline 2596 -version 623'

[04:42:19] 
[04:42:19] *------------------------------*
[04:42:19] Folding@Home Gromacs Core
[04:42:19] Version 1.90 (March 8, 2006)
[04:42:19] 
[04:42:19] Preparing to commence simulation
[04:42:19] - Looking at optimizations...
[04:42:19] - Created dyn
[04:42:19] - Files status OK
[04:42:19] - Expanded 419671 -> 2026461 (decompressed 482.8 percent)
[04:42:19] - Starting from initial work packet
[04:42:19] 
[04:42:19] Project: 6512 (Run 10, Clone 160, Gen 58)
[04:42:19] 
[04:42:19] Assembly optimizations on if available.
[04:42:19] Entering M.D.
[04:42:26] Protein: TR462_A_11 in water
[04:42:26] 
[04:42:26] Writing local files
[04:42:26] Extra SSE boost OK.
[04:42:26] Writing local files
[04:42:26] Completed 0 out of 250000 steps  (0%)
[04:52:12] Writing local files
[04:52:12] Completed 2500 out of 250000 steps  (1%)
[05:01:54] Writing local files
[05:01:54] Completed 5000 out of 250000 steps  (2%)
[05:11:33] Writing local files

.......

[12:20:32] Completed 117500 out of 250000 steps  (47%)
[12:30:13] Writing local files
[12:30:13] Completed 120000 out of 250000 steps  (48%)
[12:39:56] Writing local files
[12:39:56] Completed 122500 out of 250000 steps  (49%)
[12:43:49] Gromacs cannot continue further.
[12:43:49] Going to send back what have done.
[12:43:49] logfile size: 52922
[12:43:49] - Writing 53458 bytes of core data to disk...
[12:43:49] Done: 52946 -> 5729 (compressed to 10.8 percent)
[12:43:49]   ... Done.
[12:43:49] 
[12:43:49] Folding@home Core Shutdown: EARLY_UNIT_END
[12:43:52] CoreStatus = 72 (114)
[12:43:52] Sending work to server
[12:43:52] Project: 6512 (Run 10, Clone 160, Gen 58)
[12:43:52] - Read packet limit of 540015616... Set to 524286976.


[12:43:52] + Attempting to send results [December 21 12:43:52 UTC]
[12:43:52] - Reading file work/wuresults_08.dat from core
[12:43:52]   (Read 6241 bytes from disk)
[12:43:52] Connecting to http://171.64.65.62:8080/
[12:43:52] Posted data.
[12:43:52] Initial: 0000; Conversation time very short, giving reduced weight in bandwidth avg
[12:43:52] - Uploaded at ~14 kB/s
[12:43:52] - Averaged speed for that direction ~242 kB/s
[12:43:52] + Results successfully sent
[12:43:52] Thank you for your contribution to Folding@Home.

sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: Project: 6512 (Run 10, Clone 160, Gen 58) EUE

Post by sortofageek »

Hi GreyWhiskers (team 0),
Your WU (P6512 R10 C160 G58) was added to the stats database on 2010-12-21 05:03:34 for 29.14 points of credit.

Yours is the second EUE. We'll keep an eye on it to see if we can make a determination about this WU. Thank you for reporting.
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: Project: 6512 (Run 10, Clone 160, Gen 58) EUE

Post by sortofageek »

Five EUEs and then someone managed to complete it successfully.
GreyWhiskers
Posts: 660
Joined: Mon Oct 25, 2010 5:57 am
Hardware configuration: a) Main unit
Sandybridge in HAF922 w/200 mm side fan
--i7 2600K@4.2 GHz
--ASUS P8P67 DeluxeB3
--4GB ADATA 1600 RAM
--750W Corsair PS
--2Seagate Hyb 750&500 GB--WD Caviar Black 1TB
--EVGA 660GTX-Ti FTW - Signature 2 GPU@ 1241 Boost
--MSI GTX560Ti @900MHz
--Win7Home64; FAH V7.3.2; 327.23 drivers

b) 2004 HP a475c desktop, 1 core Pent 4 HT@3.2 GHz; Mem 2GB;HDD 160 GB;Zotac GT430PCI@900 MHz
WinXP SP3-32 FAH v7.3.6 301.42 drivers - GPU slot only

c) 2005 Toshiba M45-S551 laptop w/2 GB mem, 160GB HDD;Pent M 740 CPU @ 1.73 GHz
WinXP SP3-32 FAH v7.3.6 [Receiving Core A4 work units]
d) 2011 lappy-15.6"-1920x1080;i7-2860QM,2.5;IC Diamond Thermal Compound;GTX 560M 1,536MB u/c@700;16GB-1333MHz RAM;HDD:500GBHyb w/ 4GB SSD;Win7HomePrem64;320.18 drivers FAH 7.4.2ß
Location: Saratoga, California USA

Re: Project: 6512 (Run 10, Clone 160, Gen 58) EUE

Post by GreyWhiskers »

I wonder what is the difference between the system that managed to complete this WU and those of ours that weren't able to complete it.
Post Reply