4615 (Run 12, Clone 196, Gen 69)

Moderators: Site Moderators, FAHC Science Team

Post Reply
lanbrown
Posts: 104
Joined: Thu Jul 09, 2009 1:21 am

4615 (Run 12, Clone 196, Gen 69)

Post by lanbrown »

Bad WU?

Code: Select all

[04:12:12] Trying to send all finished work units
[04:12:12] + No unsent completed units remaining.
[04:12:12] - Preparing to get new work unit...
[04:12:12] + Attempting to get work packet
[04:12:12] - Will indicate memory of 510 MB
[04:12:12] - Connecting to assignment server
[04:12:12] Connecting to http://assign.stanford.edu:8080/
[04:12:13] Posted data.
[04:12:13] Initial: E6A9; - Successful: assigned to (169.230.26.30).
[04:12:13] + News From Folding@Home: Welcome to Folding@Home
[04:12:13] Loaded queue successfully.
[04:12:13] Connecting to http://169.230.26.30:8080/
[04:12:13] Posted data.
[04:12:13] Initial: 0000; - Receiving payload (expected size: 20027)
[04:12:14] - Downloaded at ~19 kB/s
[04:12:14] - Averaged speed for that direction ~30 kB/s
[04:12:14] + Received work.
[04:12:14] Trying to send all finished work units
[04:12:14] + No unsent completed units remaining.
[04:12:14] + Closed connections
[04:12:14] 
[04:12:14] + Processing work unit
[04:12:14] Core required: FahCore_82.exe
[04:12:14] Core found.
[04:12:14] Working on queue slot 05 [August 22 04:12:14 UTC]
[04:12:14] + Working ...
[04:12:14] - Calling '.\FahCore_82.exe -dir work/ -suffix 05 -checkpoint 15 -verbose -lifeline 5564 -version 623'

[04:12:14] 
[04:12:14] *------------------------------*
[04:12:14] Folding@Home PMD Core
[04:12:14] Version 1.03 (September 7, 2005)
[04:12:14] 
[04:12:14] Preparing to commence simulation
[04:12:14] - Looking at optimizations...
[04:12:14] - Created dyn
[04:12:14] - Files status OK
[04:12:14] - Expanded 19515 -> 128556 (decompressed 658.7 percent)
[04:12:14] 
[04:12:14] Project: 4615 (Run 12, Clone 196, Gen 69)
[04:12:14] 
[04:12:14] Assembly optimizations on if available.
[04:12:14] Entering M.D.
[04:12:20] Going to send back what have done.
[04:12:20] logfile size: 5649
[04:12:20] - Writing 6169 bytes of core data to disk...
[04:12:20]   ... Done.
[04:12:20] 
[04:12:20] Folding@home Core Shutdown: EARLY_UNIT_END
[04:12:24] CoreStatus = 72 (114)
[04:12:24] Sending work to server
[04:12:24] Project: 4615 (Run 12, Clone 196, Gen 69)
[04:12:24] + Attempting to send results [August 22 04:12:24 UTC]
[04:12:24] - Reading file work/wuresults_05.dat from core
[04:12:24]   (Read 6169 bytes from disk)
[04:12:24] Connecting to http://169.230.26.30:8080/
[04:12:24] Posted data.
[04:12:24] Initial: 0000; Conversation time very short, giving reduced weight in bandwidth avg
[04:12:24] - Uploaded at ~14 kB/s
[04:12:24] - Averaged speed for that direction ~62 kB/s
[04:12:24] + Results successfully sent
[04:12:24] Thank you for your contribution to Folding@Home.
[04:12:28] Trying to send all finished work units
[04:12:28] + No unsent completed units remaining.
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: 4615 (Run 12, Clone 196, Gen 69)

Post by sortofageek »

Most definitely. Thanks for reporting it.

The WU (P4615,R12,C196,G69) has been reported as a bad WU.
Post Reply