Project: 6505 (Run 17, Clone 81, Gen 73)

Moderators: Site Moderators, FAHC Science Team

Post Reply
SantaFe
Posts: 72
Joined: Thu Dec 06, 2007 7:01 pm
Location: In The Freightyard.

Project: 6505 (Run 17, Clone 81, Gen 73)

Post by SantaFe »

Got another one of these p6505's.

Code: Select all

[21:20:45] *------------------------------*
[21:20:45] Folding@Home Gromacs Core
[21:20:45] Version 1.90 (March 8, 2006)
[21:20:45] 
[21:20:45] Preparing to commence simulation
[21:20:45] - Assembly optimizations manually forced on.
[21:20:45] - Not checking prior termination.
[21:20:45] - Expanded 504156 -> 2510713 (decompressed 498.0 percent)
[21:20:45] - Starting from initial work packet
[21:20:45] 
[21:20:45] Project: 6505 (Run 17, Clone 81, Gen 73)
[21:20:45] 
[21:20:45] Assembly optimizations on if available.
[21:20:45] Entering M.D.
[21:20:52] Protein: 1CFC_A_18 in water
[21:20:52] 
[21:20:52] Writing local files
[21:20:52] Extra SSE boost OK.
[21:20:52] Writing local files
Hope it gets past 38%. ;)

EDIT: Nope, got to 33% & died.

Code: Select all

[21:20:45] 
[21:20:45] *------------------------------*
[21:20:45] Folding@Home Gromacs Core
[21:20:45] Version 1.90 (March 8, 2006)
[21:20:45] 
[21:20:45] Preparing to commence simulation
[21:20:45] - Assembly optimizations manually forced on.
[21:20:45] - Not checking prior termination.
[21:20:45] - Expanded 504156 -> 2510713 (decompressed 498.0 percent)
[21:20:45] - Starting from initial work packet
[21:20:45] 
[21:20:45] Project: 6505 (Run 17, Clone 81, Gen 73)
[21:20:45] 
[21:20:45] Assembly optimizations on if available.
[21:20:45] Entering M.D.
[21:20:52] Protein: 1CFC_A_18 in water
[21:20:52] 
[21:20:52] Writing local files
[21:20:52] Extra SSE boost OK.
[21:20:52] Writing local files
[21:20:52] Completed 0 out of 250000 steps  (0%)
[21:30:34] Writing local files
[21:30:34] Completed 2500 out of 250000 steps  (1%)
[21:40:10] Writing local files
[21:40:10] Completed 5000 out of 250000 steps  (2%)
[21:50:08] Writing local files
[21:50:08] Completed 7500 out of 250000 steps  (3%)
[22:00:19] Writing local files
[22:00:19] Completed 10000 out of 250000 steps  (4%)
[22:02:55] - Autosending finished units...
[22:02:55] Trying to send all finished work units
[22:02:55] + No unsent completed units remaining.
[22:02:55] - Autosend completed
[22:09:19] Writing local files
[22:09:19] Completed 12500 out of 250000 steps  (5%)
[22:18:40] Writing local files
[22:18:40] Completed 15000 out of 250000 steps  (6%)
[22:28:17] Writing local files
[22:28:17] Completed 17500 out of 250000 steps  (7%)
[22:37:38] Writing local files
[22:37:38] Completed 20000 out of 250000 steps  (8%)
[22:47:07] Writing local files
[22:47:07] Completed 22500 out of 250000 steps  (9%)
[22:56:13] Writing local files
[22:56:13] Completed 25000 out of 250000 steps  (10%)
[23:05:40] Writing local files
[23:05:40] Completed 27500 out of 250000 steps  (11%)
[23:15:43] Writing local files
[23:15:43] Completed 30000 out of 250000 steps  (12%)
[23:25:43] Writing local files
[23:25:43] Completed 32500 out of 250000 steps  (13%)
[23:35:35] Writing local files
[23:35:35] Completed 35000 out of 250000 steps  (14%)
[23:45:42] Writing local files
[23:45:42] Completed 37500 out of 250000 steps  (15%)
[23:55:25] Writing local files
[23:55:25] Completed 40000 out of 250000 steps  (16%)
[00:04:49] Writing local files
[00:04:49] Completed 42500 out of 250000 steps  (17%)
[00:13:30] Writing local files
[00:13:30] Completed 45000 out of 250000 steps  (18%)
[00:22:39] Writing local files
[00:22:39] Completed 47500 out of 250000 steps  (19%)
[00:32:10] Writing local files
[00:32:10] Completed 50000 out of 250000 steps  (20%)
[00:41:24] Writing local files
[00:41:24] Completed 52500 out of 250000 steps  (21%)
[00:50:44] Writing local files
[00:50:44] Completed 55000 out of 250000 steps  (22%)
[00:59:59] Writing local files
[00:59:59] Completed 57500 out of 250000 steps  (23%)
[01:09:19] Writing local files
[01:09:19] Completed 60000 out of 250000 steps  (24%)
[01:19:04] Writing local files
[01:19:04] Completed 62500 out of 250000 steps  (25%)
[01:27:49] ***** Got an Activate signal (2)
[01:27:49] 
[01:27:49] Folding@home Core Shutdown: INTERRUPTED
[01:27:49] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [August 20 01:29:55]  [Had to reboot due to Kernal Update]


# Linux Console Edition #######################################################

                       Folding@Home Client Version 6.02

                          http://folding.stanford.edu

##################################################################
Launch directory: /home/santafe/FAH1
Executable: ./fah6
Arguments: -local -forceasm -verbosity 9 

Warning:
 By using the -forceasm flag, you are overriding
 safeguards in the program. If you did not intend to
 do this, please restart the program without -forceasm.
 If work units are not completing fully (and particularly
 if your machine is overclocked), then please discontinue
 use of the flag.

[01:29:55] - Ask before connecting: No
[01:29:55] - User name: Santa_Fe (Team 4)
[01:29:55] - User ID: xxxxxxxxxxxxxx
[01:29:55] - Machine ID: 1
[01:29:55] 
[01:29:55] Loaded queue successfully.
[01:29:55] - Autosending finished units...
[01:29:55] 
[01:29:55] Trying to send all finished work units
[01:29:55] + Processing work unit
[01:29:55] + No unsent completed units remaining.
[01:29:55] Core required: FahCore_78.exe
[01:29:55] - Autosend completed
[01:29:55] Core found.
[01:29:55] Working on Unit 05 [August 20 01:29:55]
[01:29:55] + Working ...
[01:29:55] - Calling './FahCore_78.exe -dir work/ -suffix 05 -checkpoint 30 -forceasm -verbose -lifeline 1419 -version 602'

[01:29:55] 
[01:29:55] *------------------------------*
[01:29:55] Folding@Home Gromacs Core
[01:29:55] Version 1.90 (March 8, 2006)
[01:29:55] 
[01:29:55] Preparing to commence simulation
[01:29:55] - Assembly optimizations manually forced on.
[01:29:55] - Not checking prior termination.
[01:29:56] - Expanded 504156 -> 2510713 (decompressed 498.0 percent)
[01:29:56] 
[01:29:56] Project: 6505 (Run 17, Clone 81, Gen 73)
[01:29:56] 
[01:29:56] Assembly optimizations on if available.
[01:29:56] Entering M.D.
[01:30:16] (Starting from checkpoint)
[01:30:16] Protein: 1CFC_A_18 in water
[01:30:16] 
[01:30:16] Writing local files
[01:30:16] Completed 62500 out of 250000 steps  (25%)
[01:30:16] Extra SSE boost OK.
[01:40:12] Writing local files
[01:40:12] Completed 65000 out of 250000 steps  (26%)
[01:49:54] Writing local files
[01:49:54] Completed 67500 out of 250000 steps  (27%)
[01:58:46] Writing local files
[01:58:46] Completed 70000 out of 250000 steps  (28%)
[02:08:12] Writing local files
[02:08:12] Completed 72500 out of 250000 steps  (29%)
[02:17:44] Writing local files
[02:17:44] Completed 75000 out of 250000 steps  (30%)
[02:27:05] Writing local files
[02:27:05] Completed 77500 out of 250000 steps  (31%)
[02:36:41] Writing local files
[02:36:41] Completed 80000 out of 250000 steps  (32%)
[02:47:11] Writing local files
[02:47:11] Completed 82500 out of 250000 steps  (33%)
[02:53:15] CoreStatus = 0 (0)
[02:53:15] Client-core communications error: ERROR 0x0
[02:53:15] Deleting current work unit & continuing...
[02:54:23] Trying to send all finished work units
[02:54:23] + No unsent completed units remaining.
[02:54:23] - Preparing to get new work unit...
[02:54:23] + Attempting to get work packet
[02:54:23] - Will indicate memory of 1000 MB
[02:54:23] - Detect CPU. Vendor: GenuineIntel, Family: 15, Model: 6, Stepping: 2
[02:54:23] - Connecting to assignment server
[02:54:23] Connecting to http://assign.stanford.edu:8080/
[02:54:23] Posted data.
[02:54:23] Initial: 4A81; - Successful: assigned to (129.74.85.15).
[02:54:23] + News From Folding@Home: Welcome to Folding@Home
[02:54:23] Loaded queue successfully.
[02:54:23] Connecting to http://129.74.85.15:8080/
[02:54:23] Posted data.
[02:54:23] Initial: 0000; - Receiving payload (expected size: 78430)
[02:54:24] - Downloaded at ~76 kB/s
[02:54:24] - Averaged speed for that direction ~301 kB/s
[02:54:24] + Received work.
[02:54:24] + Closed connections
[02:54:29] 
[02:54:29] + Processing work unit
[02:54:29] Core required: FahCore_b4.exe
[02:54:29] Core found.
[02:54:29] Working on Unit 06 [August 20 02:54:29]
[02:54:29] + Working ...
[02:54:29] - Calling './FahCore_b4.exe -dir work/ -suffix 06 -checkpoint 30 -forceasm -verbose -lifeline 1419 -version 602'

[02:54:30] *********************** Log Started 20/Aug/2010 02:54:30 ***********************
[02:54:30] ************************** ProtoMol Folding@Home Core **************************
[02:54:30]   Version: 25
[02:54:30]      Type: 180
[02:54:30]      Core: ProtoMol
[02:54:30]   Website: http://folding.stanford.edu/
[02:54:30] Copyright: (c) 2009 Stanford University
[02:54:30]    Author: Joseph Coffland <joseph@cauldrondevelopment.com>
[02:54:30]      Args: -dir work/ -suffix 06 -checkpoint 30 -forceasm -verbose -lifeline
[02:54:30]            1419 -version 602
[02:54:30] ************************************ Build *************************************
[02:54:30]      Date: May 11 2010
[02:54:30]      Time: 19:14:45
[02:54:30]  Revision: 1818
[02:54:30]  Compiler: Intel(R) C++ g++ 4.1 mode 1110
[02:54:30]   Options: -std=gnu++98 -mia32 -O3 -funroll-loops
[02:54:30]            -axSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 -restrict
[02:54:30]   Defines: NDEBUG _REENTRANT HAVE_GEEKINFO HAVE_PTHREADS HAVE_PTHREADS
[02:54:30]            HAVE_EXPAT HAVE_OPENSSL HAVE_LIBFAH HAVE_LAPACK
[02:54:30]  Platform: Linux 2.4.27-3-386
[02:54:30]      Bits: 32
[02:54:30]      Mode: Release
[02:54:30] ************************************ System ************************************
[02:54:30]        OS: Linux 2.6.32-24-generic i686
[02:54:30]       CPU: Intel(R) Pentium(R) D CPU 3.00GHz
[02:54:30]    CPU ID: GenuineIntel Family 15 Model 6 Stepping 2
[02:54:30]      CPUs: 2 Logical, 1 Physical
[02:54:30]    Memory: 1001 MB
[02:54:30]   Threads: Linux
[02:54:30] ********************************************************************************
[02:54:30] Project: 10033 (Run 1289, Clone 0, Gen 13)
[02:54:30] Unit: 0x000000190001329c4bd49e0d00014292
[02:54:30] User: 0x00000000000000000000000000000000
[02:54:30] Machine: 1
[02:54:30] Reading tar file par_all27_prot_lipid.inp
[02:54:30] Reading tar file scpismQuartic.inp
[02:54:30] Reading tar file ww.pdb
[02:54:30] Reading tar file ww.psf
[02:54:30] Reading tar file checkpt
[02:54:30] Reading tar file ww.976.pos
[02:54:30] Reading tar file ww.976.vel
[02:54:30] Reading tar file protomol.conf
[02:54:30] Reading tar file core.xml
[02:54:30] Digital signatures verified
[02:54:31] GUI Server started
[02:54:31] Completed 0 out of 499375 steps (0%)
[03:08:10] Completed 5000 out of 499375 steps (1%)
Bummer. Don't know what's up with the Client-core communications error: ERROR 0x0 errors, Haven't had these on any other GROMAC WU's using the 32 Bit Ubuntu 10.04 LTS O/S.
Aren't you glad you use http://foldingforum.org! Don't you wish Everybody did? :D
Top
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:
Contact sortofageek

Re: 6505.17.51.65 EUE

Post by sortofageek »

Sorry, I missed checking this. Maybe because it didn't have its own topic. Anyway ...

Project: 6505 (Run 17, Clone 81, Gen 73)



The WU (P6505,R17,C81,G73) has been reported as a bad WU.
Top
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:
Contact sortofageek

Re: Project: 6505 (Run 17, Clone 81, Gen 73)

Post by sortofageek »

For the record, Santa Fe is running Ubuntu. He keeps having this happen with the P6505s when assigned to his Ubuntu folder. Others had trouble with the one above and another one he showed me (also marked bad), but they are sending back partial WUs for partial credit. These seem to hate Ubuntu most.
Top
Post Reply

Return to “Issues with a specific WU”