Project 10632 (Run 35, Clone 3, Gen 7)

Moderators: Site Moderators, FAHC Science Team

Post Reply
rickoic
Posts: 320
Joined: Sat May 23, 2009 4:49 pm
Hardware configuration: eVga x299 DARK 2070 Super, eVGA 2080, eVga 1070, eVga 2080 Super
MSI x399 eVga 2080, eVga 1070, eVga 1070, GT970
Location: Mississippi near Memphis, Tn

Project 10632 (Run 35, Clone 3, Gen 7)

Post by rickoic »

Well my eVga 460 folded 92 consececutive wu's without a hitch. Then it d/l'd Project: 10632 (Run 35, Clone 3, Gen 7) and hickuped 5 times and got shut down 24hours because it was an UNSTABLE_MACHINE.

Code: Select all

[19:06:32] + Results successfully sent
[19:06:32] Thank you for your contribution to Folding@Home.
[19:06:32] + Number of Units Completed: 3197

[19:06:36] - Preparing to get new work unit...
[19:06:36] Cleaning up work directory
[19:06:36] + Attempting to get work packet
[19:06:36] Passkey found
[19:06:36] Gpu type=3 species=30.
[19:06:36] - Connecting to assignment server
[19:06:37] - Successful: assigned to (171.67.108.20).
[19:06:37] + News From Folding@Home: Welcome to Folding@Home
[19:06:37] Loaded queue successfully.
[19:06:37] Gpu type=3 species=30.
[19:06:37] + Closed connections
[19:06:37] 
[19:06:37] + Processing work unit
[19:06:37] Core required: FahCore_15.exe
[19:06:37] Core found.
[19:06:37] Working on queue slot 05 [July 22 19:06:37 UTC]
[19:06:37] + Working ...
[19:06:37] 
[19:06:37] *------------------------------*
[19:06:37] Folding@Home GPU Core -- Beta
[19:06:37] Version 2.09 (Thu May 20 11:58:42 PDT 2010)
[19:06:37] 
[19:06:37] Build host: SimbiosNvdWin7
[19:06:37] Board Type: Nvidia
[19:06:37] Core      : 
[19:06:37] Preparing to commence simulation
[19:06:37] - Looking at optimizations...
[19:06:37] DeleteFrameFiles: successfully deleted file=work/wudata_05.ckp
[19:06:37] - Created dyn
[19:06:37] - Files status OK
[19:06:37] sizeof(CORE_PACKET_HDR) = 512 file=<>
[19:06:37] - Expanded 28881 -> 163067 (decompressed 564.6 percent)
[19:06:37] Called DecompressByteArray: compressed_data_size=28881 data_size=163067, decompressed_data_size=163067 diff=0
[19:06:37] - Digital signature verified
[19:06:37] 
[19:06:37] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:06:37] 
[19:06:37] Assembly optimizations on if available.
[19:06:37] Entering M.D.
[19:06:43] Tpr hash work/wudata_05.tpr:  2909006096 4081660995 2390861205 816812102 2296539644
[19:06:43] Working on 582 p2750_N68H_AM03
[19:06:43] Client config found, loading data.
[19:06:44] Starting GUI Server
[19:06:47] mdrun_gpu returned 
[19:06:47] NANs detected on GPU
[19:06:47] 
[19:06:47] Folding@home Core Shutdown: UNSTABLE_MACHINE
[19:06:51] CoreStatus = 7A (122)
[19:06:51] Sending work to server
[19:06:51] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:06:51] - Read packet limit of 540015616... Set to 524286976.
[19:06:51] - Error: Could not get length of results file work/wuresults_05.dat
[19:06:51] - Error: Could not read unit 05 file. Removing from queue.
[19:06:51] - Preparing to get new work unit...
[19:06:51] Cleaning up work directory
[19:06:51] + Attempting to get work packet
[19:06:51] Passkey found
[19:06:51] Gpu type=3 species=30.
[19:06:51] - Connecting to assignment server
[19:06:52] - Successful: assigned to (171.67.108.20).
[19:06:52] + News From Folding@Home: Welcome to Folding@Home
[19:06:52] Loaded queue successfully.
[19:06:52] Gpu type=3 species=30.
[19:06:53] + Closed connections
[19:06:58] 
[19:06:58] + Processing work unit
[19:06:58] Core required: FahCore_15.exe
[19:06:58] Core found.
[19:06:58] Working on queue slot 06 [July 22 19:06:58 UTC]
[19:06:58] + Working ...
[19:06:58] 
[19:06:58] *------------------------------*
[19:06:58] Folding@Home GPU Core -- Beta
[19:06:58] Version 2.09 (Thu May 20 11:58:42 PDT 2010)
[19:06:58] 
[19:06:58] Build host: SimbiosNvdWin7
[19:06:58] Board Type: Nvidia
[19:06:58] Core      : 
[19:06:58] Preparing to commence simulation
[19:06:58] - Looking at optimizations...
[19:06:58] DeleteFrameFiles: successfully deleted file=work/wudata_06.ckp
[19:06:58] - Created dyn
[19:06:58] - Files status OK
[19:06:58] sizeof(CORE_PACKET_HDR) = 512 file=<>
[19:06:58] - Expanded 28881 -> 163067 (decompressed 564.6 percent)
[19:06:58] Called DecompressByteArray: compressed_data_size=28881 data_size=163067, decompressed_data_size=163067 diff=0
[19:06:58] - Digital signature verified
[19:06:58] 
[19:06:58] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:06:58] 
[19:06:58] Assembly optimizations on if available.
[19:06:58] Entering M.D.
[19:07:04] Tpr hash work/wudata_06.tpr:  2909006096 4081660995 2390861205 816812102 2296539644
[19:07:04] Working on 582 p2750_N68H_AM03
[19:07:04] Client config found, loading data.
[19:07:04] Starting GUI Server
[19:07:08] mdrun_gpu returned 
[19:07:08] NANs detected on GPU
[19:07:08] 
[19:07:08] Folding@home Core Shutdown: UNSTABLE_MACHINE
[19:07:12] CoreStatus = 7A (122)
[19:07:12] Sending work to server
[19:07:12] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:07:12] - Read packet limit of 540015616... Set to 524286976.
[19:07:12] - Error: Could not get length of results file work/wuresults_06.dat
[19:07:12] - Error: Could not read unit 06 file. Removing from queue.
[19:07:12] - Preparing to get new work unit...
[19:07:12] Cleaning up work directory
[19:07:12] + Attempting to get work packet
[19:07:12] Passkey found
[19:07:12] Gpu type=3 species=30.
[19:07:12] - Connecting to assignment server
[19:07:12] - Successful: assigned to (171.67.108.20).
[19:07:12] + News From Folding@Home: Welcome to Folding@Home
[19:07:13] Loaded queue successfully.
[19:07:13] Gpu type=3 species=30.
[19:07:13] + Closed connections
[19:07:18] 
[19:07:18] + Processing work unit
[19:07:18] Core required: FahCore_15.exe
[19:07:18] Core found.
[19:07:18] Working on queue slot 07 [July 22 19:07:18 UTC]
[19:07:18] + Working ...
[19:07:18] 
[19:07:18] *------------------------------*
[19:07:18] Folding@Home GPU Core -- Beta
[19:07:18] Version 2.09 (Thu May 20 11:58:42 PDT 2010)
[19:07:18] 
[19:07:18] Build host: SimbiosNvdWin7
[19:07:18] Board Type: Nvidia
[19:07:18] Core      : 
[19:07:18] Preparing to commence simulation
[19:07:18] - Looking at optimizations...
[19:07:18] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[19:07:18] - Created dyn
[19:07:18] - Files status OK
[19:07:18] sizeof(CORE_PACKET_HDR) = 512 file=<>
[19:07:18] - Expanded 28881 -> 163067 (decompressed 564.6 percent)
[19:07:18] Called DecompressByteArray: compressed_data_size=28881 data_size=163067, decompressed_data_size=163067 diff=0
[19:07:18] - Digital signature verified
[19:07:18] 
[19:07:18] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:07:18] 
[19:07:18] Assembly optimizations on if available.
[19:07:18] Entering M.D.
[19:07:24] Tpr hash work/wudata_07.tpr:  2909006096 4081660995 2390861205 816812102 2296539644
[19:07:24] Working on 582 p2750_N68H_AM03
[19:07:24] Client config found, loading data.
[19:07:25] Starting GUI Server
[19:07:29] mdrun_gpu returned 
[19:07:29] NANs detected on GPU
[19:07:29] 
[19:07:29] Folding@home Core Shutdown: UNSTABLE_MACHINE
[19:07:32] CoreStatus = 7A (122)
[19:07:32] Sending work to server
[19:07:32] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:07:32] - Read packet limit of 540015616... Set to 524286976.
[19:07:32] - Error: Could not get length of results file work/wuresults_07.dat
[19:07:32] - Error: Could not read unit 07 file. Removing from queue.
[19:07:32] - Preparing to get new work unit...
[19:07:32] Cleaning up work directory
[19:07:32] + Attempting to get work packet
[19:07:32] Passkey found
[19:07:32] Gpu type=3 species=30.
[19:07:32] - Connecting to assignment server
[19:07:33] - Successful: assigned to (171.67.108.20).
[19:07:33] + News From Folding@Home: Welcome to Folding@Home
[19:07:33] Loaded queue successfully.
[19:07:33] Gpu type=3 species=30.
[19:07:33] + Closed connections
[19:07:38] 
[19:07:38] + Processing work unit
[19:07:38] Core required: FahCore_15.exe
[19:07:38] Core found.
[19:07:38] Working on queue slot 08 [July 22 19:07:38 UTC]
[19:07:38] + Working ...
[19:07:38] 
[19:07:38] *------------------------------*
[19:07:38] Folding@Home GPU Core -- Beta
[19:07:38] Version 2.09 (Thu May 20 11:58:42 PDT 2010)
[19:07:38] 
[19:07:38] Build host: SimbiosNvdWin7
[19:07:38] Board Type: Nvidia
[19:07:38] Core      : 
[19:07:38] Preparing to commence simulation
[19:07:38] - Looking at optimizations...
[19:07:38] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[19:07:38] - Created dyn
[19:07:38] - Files status OK
[19:07:38] sizeof(CORE_PACKET_HDR) = 512 file=<>
[19:07:38] - Expanded 28881 -> 163067 (decompressed 564.6 percent)
[19:07:38] Called DecompressByteArray: compressed_data_size=28881 data_size=163067, decompressed_data_size=163067 diff=0
[19:07:38] - Digital signature verified
[19:07:38] 
[19:07:38] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:07:38] 
[19:07:38] Assembly optimizations on if available.
[19:07:38] Entering M.D.
[19:07:44] Tpr hash work/wudata_08.tpr:  2909006096 4081660995 2390861205 816812102 2296539644
[19:07:44] Working on 582 p2750_N68H_AM03
[19:07:44] Client config found, loading data.
[19:07:45] Starting GUI Server
[19:07:48] mdrun_gpu returned 
[19:07:48] NANs detected on GPU
[19:07:48] 
[19:07:48] Folding@home Core Shutdown: UNSTABLE_MACHINE
[19:07:53] CoreStatus = 7A (122)
[19:07:53] Sending work to server
[19:07:53] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:07:53] - Read packet limit of 540015616... Set to 524286976.
[19:07:53] - Error: Could not get length of results file work/wuresults_08.dat
[19:07:53] - Error: Could not read unit 08 file. Removing from queue.
[19:07:53] - Preparing to get new work unit...
[19:07:53] Cleaning up work directory
[19:07:53] + Attempting to get work packet
[19:07:53] Passkey found
[19:07:53] Gpu type=3 species=30.
[19:07:53] - Connecting to assignment server
[19:07:53] - Successful: assigned to (171.67.108.20).
[19:07:53] + News From Folding@Home: Welcome to Folding@Home
[19:07:53] Loaded queue successfully.
[19:07:53] Gpu type=3 species=30.
[19:07:54] + Closed connections
[19:07:59] 
[19:07:59] + Processing work unit
[19:07:59] Core required: FahCore_15.exe
[19:07:59] Core found.
[19:07:59] Working on queue slot 09 [July 22 19:07:59 UTC]
[19:07:59] + Working ...
[19:07:59] 
[19:07:59] *------------------------------*
[19:07:59] Folding@Home GPU Core -- Beta
[19:07:59] Version 2.09 (Thu May 20 11:58:42 PDT 2010)
[19:07:59] 
[19:07:59] Build host: SimbiosNvdWin7
[19:07:59] Board Type: Nvidia
[19:07:59] Core      : 
[19:07:59] Preparing to commence simulation
[19:07:59] - Looking at optimizations...
[19:07:59] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[19:07:59] - Created dyn
[19:07:59] - Files status OK
[19:07:59] sizeof(CORE_PACKET_HDR) = 512 file=<>
[19:07:59] - Expanded 28881 -> 163067 (decompressed 564.6 percent)
[19:07:59] Called DecompressByteArray: compressed_data_size=28881 data_size=163067, decompressed_data_size=163067 diff=0
[19:07:59] - Digital signature verified
[19:07:59] 
[19:07:59] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:07:59] 
[19:07:59] Assembly optimizations on if available.
[19:07:59] Entering M.D.
[19:08:05] Tpr hash work/wudata_09.tpr:  2909006096 4081660995 2390861205 816812102 2296539644
[19:08:05] Working on 582 p2750_N68H_AM03
[19:08:05] Client config found, loading data.
[19:08:05] Starting GUI Server
[19:08:09] mdrun_gpu returned 
[19:08:09] NANs detected on GPU
[19:08:09] 
[19:08:09] Folding@home Core Shutdown: UNSTABLE_MACHINE
[19:08:13] CoreStatus = 7A (122)
[19:08:13] Sending work to server
[19:08:13] Project: 10632 (Run 35, Clone 3, Gen 7)
[19:08:13] - Read packet limit of 540015616... Set to 524286976.
[19:08:13] - Error: Could not get length of results file work/wuresults_09.dat
[19:08:13] - Error: Could not read unit 09 file. Removing from queue.
[19:08:13] EUE limit exceeded. Pausing 24 hours.
Fold on
Rick
I'm folding because Dec 2005 I had radical prostate surgery.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
Top
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:
Contact sortofageek

Re: Project 10632 (Run 35, Clone 3, Gen 7)

Post by sortofageek »

Project: 10632 (Run 35, Clone 3, Gen 7) has been successfully completed and returned by another folder, so it would seem the problem is not the WU.
Top
rickoic
Posts: 320
Joined: Sat May 23, 2009 4:49 pm
Hardware configuration: eVga x299 DARK 2070 Super, eVGA 2080, eVga 1070, eVga 2080 Super
MSI x399 eVga 2080, eVga 1070, eVga 1070, GT970
Location: Mississippi near Memphis, Tn

Re: Project 10632 (Run 35, Clone 3, Gen 7)

Post by rickoic »

Well I have 2 eVga 460's installed so I swapped them. The 460 that was having the problems with the wu is now folding happily on P10632 (R85, C2, G41) and the other 460 is choking on the P10632 (R35, C3, G7) just like the other 460 was.

Fold on
Rick
I'm folding because Dec 2005 I had radical prostate surgery.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
Top
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Project 10632 (Run 35, Clone 3, Gen 7)

Post by bruce »

OK, it's not the GPU and it's not the WU, so my money is on the drivers.
Top
rickoic
Posts: 320
Joined: Sat May 23, 2009 4:49 pm
Hardware configuration: eVga x299 DARK 2070 Super, eVGA 2080, eVga 1070, eVga 2080 Super
MSI x399 eVga 2080, eVga 1070, eVga 1070, GT970
Location: Mississippi near Memphis, Tn

Re: Project 10632 (Run 35, Clone 3, Gen 7)

Post by rickoic »

Ok, I've now moved a 250 into slot 1, with the 460's in slots 2 and 3.

The 250 pulled a p5782 (R9, C25, G211) and failed on it 8 times before being put to sleep.

The 460 in slot 3 is continuing with P10632 (R85, C2, G41) with no problems.
The 460 in slot 2 is continuing with the P5782 (R10, C19, G225) that the 250 had started. Hopefully will finish it and the pick up a A3.

Next step will be to run memtest on ram, then if ram checks out alright, might have to RMA motherboard.

Fold on
Rick
I'm folding because Dec 2005 I had radical prostate surgery.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
Top
rickoic
Posts: 320
Joined: Sat May 23, 2009 4:49 pm
Hardware configuration: eVga x299 DARK 2070 Super, eVGA 2080, eVga 1070, eVga 2080 Super
MSI x399 eVga 2080, eVga 1070, eVga 1070, GT970
Location: Mississippi near Memphis, Tn

Re: Project 10632 (Run 35, Clone 3, Gen 7)

Post by rickoic »

Ok, ran MEMTEST86 on my ram and got errors, but I don't think it's ram errors.
Have 6 sticks of 2GB Corsair ram installed.
Ran MEMTEST86 and got following errors:
Lowest error address: 0007F800000 2040.0MB
Highest error address:0007FC00000 2044.0MB

Removed 1st stick and moved all others forward and put 1st stick in as 6th stick (ram MEMTEST86 again and got same errors)
did the same think with sticks of ram again until all had cycled into 1st slot and each time I ram MEMTEST86 I got the same errors.

I think its now a motherboard issue. Anyone else have any ideas?

Tks
Rick
I'm folding because Dec 2005 I had radical prostate surgery.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
Top
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:
Contact PantherX

Re: Project 10632 (Run 35, Clone 3, Gen 7)

Post by PantherX »

rickoic wrote:...The 460 in slot 2 is continuing with the P5782 (R10, C19, G225) that the 250 had started. Hopefully will finish it and the pick up a A3...
That is your problem. A Fermi GPU will not process GPU2 WUs (WUs that use FahCore_11), it only processes GPU3 WUs (WUs that use FahCore_15) Maybe you can refer to my Guide and see if there is anything useful.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Top
Post Reply

Return to “Issues with a specific WU”