No appropriate work server was available [ATI]

Moderators: Site Moderators, FAHC Science Team

DBoone
Posts: 6
Joined: Sat May 08, 2010 12:40 am

Re: No appropriate work server was available [ATI]

Post by DBoone »

Thanks for the update Vijay. We'll hang in there.
pfv
Posts: 9
Joined: Tue Jan 22, 2008 12:01 am

Re: No appropriate work server was available [ATI]

Post by pfv »

Thanks Prof, please keep us often updated
vvoelz
Pande Group Member
Posts: 539
Joined: Sun Dec 02, 2007 8:07 pm
Location: Temple University, Philadelphia PA

Re: No appropriate work server was available [ATI]

Post by vvoelz »

Just wanted to let you know that I'm looking into these issues further on the ATI server that I maintain (vspg2v2). So far it looks like WUs are being sent/received fine, but I'll dig deeper into the reported errors. Hopefully we'll figure out what's going on soon.

Vince

p.s. I'm rebuilding the job stack (again) on this machine, so pleas bear with us with the intermittent unavailability...
Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Re: No appropriate work server was available [ATI]

Post by Tynat »

Thanks for the updates. Yeah, server is currently unavailable, but the last WU resulted in UNSTABLE_MACHINE five times.

Project: 5745 (Run 0, Clone 59, Gen 228) was first reported as bad on 2009-12-18 (Fri), 5:11 pm. I have added the relevant part of my GPU log to the existing thread.
All clients stopped due to Stanford's upcoming September 2011 decision
VijayPande
Pande Group Member
Posts: 2058
Joined: Fri Nov 30, 2007 6:25 am
Location: Stanford

Re: No appropriate work server was available [ATI]

Post by VijayPande »

How are things going from the donor side? Has it gotten any better?
Prof. Vijay Pande, PhD
Departments of Chemistry, Structural Biology, and Computer Science
Chair, Biophysics
Director, Folding@home Distributed Computing Project
Stanford University
Tynat
Posts: 89
Joined: Wed Feb 11, 2009 1:37 am

Re: No appropriate work server was available [ATI]

Post by Tynat »

Yes, thank you. There has been a very noticeable improvement. Since my last UNSTABLE_MACHINE report mentioned above, both GPU clients are able to receive work and continue to have clean runs.
All clients stopped due to Stanford's upcoming September 2011 decision
Brazos
Posts: 27
Joined: Tue Feb 24, 2009 2:02 pm

Re: No appropriate work server was available [ATI]

Post by Brazos »

Better here - working on Project: 5742 (Run 2, Clone 275, Gen 0) with no problems yet.

Thanks!
Sahkolihaa
Posts: 13
Joined: Sat Jun 28, 2008 7:48 am
Hardware configuration: AMD Phenom II X4 965 Black Edition 125W @ 3.4GHz, 4x4GiB (16GiB) Corsair XMS3 1333MHz RAM, Asus M5A97 Pro motherboard, NVIDIA GTX 560 Ti 1GiB, NVIDIA 9800GT 1GiB Eco
Location: Tamworth, England
Contact:

Re: No appropriate work server was available [ATI]

Post by Sahkolihaa »

My HD3870 seems to be doing fine. :)
Image
scottwilkins
Posts: 6
Joined: Tue May 13, 2008 3:23 am

Re: No appropriate work server was available [ATI]

Post by scottwilkins »

I just checked logs. Some machines showed the unstable error over the weekend. Today all are flowing. Maybe too early to tell if anything has improved yet...
This is my sig...
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: No appropriate work server was available [ATI]

Post by bruce »

scottwilkins wrote:I just checked logs. Some machines showed the unstable error over the weekend. Today all are flowing. Maybe too early to tell if anything has improved yet...
Let's stay on topic here. The topic title is "No appropriate work server..." That was a problem, and I believe that you have to agree that it has certainly improved. The stablity of the WUs being is really a separate issue.

From your perspective, I can see how getting unstable WUs assigned isn't any better than getting no WUs assigned but from the Pande Group's perspective, they have entirely different causes and entirely different fixes. I'm sure that they intend to fix both problems, but you're not answering the question that was asked.
pfv
Posts: 9
Joined: Tue Jan 22, 2008 12:01 am

Re: No appropriate work server was available [ATI]

Post by pfv »

All my ATI clients are receiving WU and are happily folding. Thanks to Bruce for contacting FAH, vvoelz for fixing it and to Prof for the follow up!
Bog
Posts: 12
Joined: Sun Jul 04, 2010 8:37 am
Hardware configuration: AMD Phenom II x6 1090T; ASUS Crosshair IV; 2 x Corsair 1GB DDR3, 1333MHz, CL9; SSD Kingston 32GB SLC sATA-II E series; 1 x ASUS EAH5850; Seasonic X-750; Windows XP Pro 32bit.
Location: Sinaia, Romania

Re: No appropriate work server was available [ATI]

Post by Bog »

Since Monday morning both GPU clients receive good work units in the first attempt - no more waiting and so far no more "UNSTABLE_MACHINE" .
Bog
Posts: 12
Joined: Sun Jul 04, 2010 8:37 am
Hardware configuration: AMD Phenom II x6 1090T; ASUS Crosshair IV; 2 x Corsair 1GB DDR3, 1333MHz, CL9; SSD Kingston 32GB SLC sATA-II E series; 1 x ASUS EAH5850; Seasonic X-750; Windows XP Pro 32bit.
Location: Sinaia, Romania

Re: No appropriate work server was available [ATI]

Post by Bog »

Code: Select all

[16:07:58] Completed 99%
[16:10:03] Completed 100%
[16:10:03] Successful run
[16:10:03] DynamicWrapper: Finished Work Unit: sleep=10000
[16:10:13] Reserved 218672 bytes for xtc file; Cosm status=0
[16:10:13] Allocated 218672 bytes for xtc file
[16:10:13] - Reading up to 218672 from "work/wudata_04.xtc": Read 218672
[16:10:13] Read 218672 bytes from xtc file; available packet space=786211792
[16:10:13] xtc file hash check passed.
[16:10:13] Reserved 33528 33528 786211792 bytes for arc file=<work/wudata_04.trr> Cosm status=0
[16:10:13] Allocated 33528 bytes for arc file
[16:10:13] - Reading up to 33528 from "work/wudata_04.trr": Read 33528
[16:10:13] Read 33528 bytes from arc file; available packet space=786178264
[16:10:13] trr file hash check passed.
[16:10:13] Allocated 560 bytes for edr file
[16:10:13] Read bedfile
[16:10:13] edr file hash check passed.
[16:10:13] Allocated 47277 bytes for logfile
[16:10:13] Read logfile
[16:10:13] GuardedRun: success in DynamicWrapper
[16:10:13] GuardedRun: done
[16:10:13] Run: GuardedRun completed.
[16:10:15] - Writing 300549 bytes of core data to disk...
[16:10:15] Done: 300037 -> 262940 (compressed to 87.6 percent)
[16:10:15]   ... Done.
[16:10:15] - Shutting down core 
[16:10:15] 
[16:10:15] Folding@home Core Shutdown: FINISHED_UNIT
[16:10:19] CoreStatus = 64 (100)
[16:10:19] Sending work to server
[16:10:19] Project: 5737 (Run 1, Clone 311, Gen 60)
[16:10:19] - Read packet limit of 540015616... Set to 524286976.


[16:10:19] + Attempting to send results [August 16 16:10:19 UTC]
[16:10:19] Gpu type=1 species=4.
[16:10:23] - Couldn't send HTTP request to server
[16:10:23] + Could not connect to Work Server (results)
[16:10:23]     (171.64.65.102:8080)
[16:10:23] + Retrying using alternative port
[16:10:25] - Couldn't send HTTP request to server
[16:10:25] + Could not connect to Work Server (results)
[16:10:25]     (171.64.65.102:80)
[16:10:25] - Error: Could not transmit unit 04 (completed August 16) to work server.
[16:10:25]   Keeping unit 04 in queue.
[16:10:25] Project: 5737 (Run 1, Clone 311, Gen 60)
[16:10:25] - Read packet limit of 540015616... Set to 524286976.


[16:10:25] + Attempting to send results [August 16 16:10:25 UTC]
[16:10:25] Gpu type=1 species=4.
[16:10:27] - Couldn't send HTTP request to server
[16:10:27] + Could not connect to Work Server (results)
[16:10:27]     (171.64.65.102:8080)
[16:10:27] + Retrying using alternative port
[16:10:29] - Couldn't send HTTP request to server
[16:10:29] + Could not connect to Work Server (results)
[16:10:29]     (171.64.65.102:80)
[16:10:29] - Error: Could not transmit unit 04 (completed August 16) to work server.
[16:10:29] - Read packet limit of 540015616... Set to 524286976.


[16:10:29] + Attempting to send results [August 16 16:10:29 UTC]
[16:10:29] Gpu type=1 species=4.
[16:10:30] - Couldn't send HTTP request to server
[16:10:30]   (Got status 503)
[16:10:30] + Could not connect to Work Server (results)
[16:10:30]     (171.67.108.17:8080)
[16:10:30] + Retrying using alternative port
[16:14:06] - Couldn't send HTTP request to server
[16:14:06] + Could not connect to Work Server (results)
[16:14:06]     (171.67.108.17:80)
[16:14:06]   Could not transmit unit 04 to Collection server; keeping in queue.
[16:14:06] - Preparing to get new work unit...
[16:14:06] Cleaning up work directory
[16:14:06] + Attempting to get work packet
[16:14:06] Passkey found
[16:14:06] Gpu type=1 species=4.
[16:14:06] - Connecting to assignment server
[16:14:10] + No appropriate work server was available; will try again in a bit.
[16:14:10] + Couldn't get work instructions.
[16:14:10] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[16:14:28] + Attempting to get work packet
[16:14:28] Passkey found
[16:14:28] Gpu type=1 species=4.
[16:14:28] - Connecting to assignment server
[16:14:30] + No appropriate work server was available; will try again in a bit.
[16:14:30] + Couldn't get work instructions.
[16:14:30] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[16:14:42] + Attempting to get work packet
[16:14:42] Passkey found
[16:14:42] Gpu type=1 species=4.
[16:14:42] - Connecting to assignment server
[16:14:45] + No appropriate work server was available; will try again in a bit.
[16:14:45] + Couldn't get work instructions.
[16:14:45] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[16:15:20] + Attempting to get work packet
[16:15:20] Passkey found
[16:15:20] Gpu type=1 species=4.
[16:15:20] - Connecting to assignment server
[16:15:22] + No appropriate work server was available; will try again in a bit.
[16:15:22] + Couldn't get work instructions.
[16:15:22] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[16:16:06] + Attempting to get work packet
[16:16:06] Passkey found
[16:16:06] Gpu type=1 species=4.
[16:16:06] - Connecting to assignment server
[16:16:09] + No appropriate work server was available; will try again in a bit.
[16:16:09] + Couldn't get work instructions.
[16:16:09] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[16:17:41] + Attempting to get work packet
[16:17:41] Passkey found
[16:17:41] Gpu type=1 species=4.
[16:17:41] - Connecting to assignment server
[16:17:46] + No appropriate work server was available; will try again in a bit.
[16:17:46] + Couldn't get work instructions.
[16:17:46] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.

Folding@Home Client Shutdown.


--- Opening Log file [August 16 16:20:08 UTC] 


# Windows GPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Blackcat\Application Data\Folding@home-gpu


[16:20:08] - Ask before connecting: No
[16:20:08] - User name: Bog (Team 176977)
[16:20:08] - User ID: 1DBBC1E51C24AA8A
[16:20:08] - Machine ID: 7
[16:20:08] 
[16:20:08] Gpu type=1 species=4.
[16:20:08] Loaded queue successfully.
[16:20:08] Initialization complete
[16:20:08] - Preparing to get new work unit...
[16:20:08] Cleaning up work directory
[16:20:08] + Attempting to get work packet
[16:20:08] Project: 5737 (Run 1, Clone 311, Gen 60)
[16:20:08] - Read packet limit of 540015616... Set to 524286976.


[16:20:08] + Attempting to send results [August 16 16:20:08 UTC]
[16:20:08] Passkey found
[16:20:08] Gpu type=1 species=4.
[16:20:08] - Connecting to assignment server
[16:20:08] Gpu type=1 species=4.
[16:20:10] - Couldn't send HTTP request to server
[16:20:10] + Could not connect to Work Server (results)
[16:20:10]     (171.64.65.102:8080)
[16:20:10] + Retrying using alternative port
[16:20:11] + No appropriate work server was available; will try again in a bit.
[16:20:11] + Couldn't get work instructions.
[16:20:11] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[16:20:13] - Couldn't send HTTP request to server
[16:20:13] + Could not connect to Work Server (results)
[16:20:13]     (171.64.65.102:80)
[16:20:13] - Error: Could not transmit unit 04 (completed August 16) to work server.
[16:20:13] - Read packet limit of 540015616... Set to 524286976.


[16:20:13] + Attempting to send results [August 16 16:20:13 UTC]
[16:20:13] Gpu type=1 species=4.
[16:20:13] - Couldn't send HTTP request to server
[16:20:13]   (Got status 503)
[16:20:13] + Could not connect to Work Server (results)
[16:20:13]     (171.67.108.17:8080)
[16:20:13] + Retrying using alternative port
[16:20:23] + Attempting to get work packet
[16:20:23] Passkey found
[16:20:23] Gpu type=1 species=4.
[16:20:23] - Connecting to assignment server
[16:20:25] + No appropriate work server was available; will try again in a bit.
[16:20:25] + Couldn't get work instructions.
[16:20:25] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[16:20:37] + Attempting to get work packet
[16:20:37] Passkey found
[16:20:37] Gpu type=1 species=4.
[16:20:37] - Connecting to assignment server
[16:20:38] + No appropriate work server was available; will try again in a bit.
[16:20:38] + Couldn't get work instructions.
[16:20:38] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[16:21:13] + Attempting to get work packet
[16:21:13] Passkey found
[16:21:13] Gpu type=1 species=4.
[16:21:13] - Connecting to assignment server
[16:21:15] + No appropriate work server was available; will try again in a bit.
[16:21:15] + Couldn't get work instructions.
[16:21:15] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[16:21:59] + Attempting to get work packet
[16:21:59] Passkey found
[16:21:59] Gpu type=1 species=4.
[16:21:59] - Connecting to assignment server
[16:22:01] + No appropriate work server was available; will try again in a bit.
[16:22:01] + Couldn't get work instructions.
[16:22:01] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[16:23:25] + Attempting to get work packet
[16:23:25] Passkey found
[16:23:25] Gpu type=1 species=4.
[16:23:25] - Connecting to assignment server
[16:23:27] + No appropriate work server was available; will try again in a bit.
[16:23:27] + Couldn't get work instructions.
[16:23:27] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.
[16:23:48] - Couldn't send HTTP request to server
[16:23:48] + Could not connect to Work Server (results)
[16:23:48]     (171.67.108.17:80)
[16:23:48]   Could not transmit unit 04 to Collection server; keeping in queue.
[16:26:19] + Attempting to get work packet
[16:26:19] Passkey found
[16:26:19] Gpu type=1 species=4.
[16:26:19] - Connecting to assignment server
[16:26:23] + No appropriate work server was available; will try again in a bit.
[16:26:23] + Couldn't get work instructions.
[16:26:23] - Attempt #7  to get work failed, and no other work to do.
Waiting before retry.
[16:31:44] + Attempting to get work packet
[16:31:44] Passkey found
[16:31:44] Gpu type=1 species=4.
[16:31:44] - Connecting to assignment server
[16:31:46] + No appropriate work server was available; will try again in a bit.
[16:31:46] + Couldn't get work instructions.
[16:31:46] - Attempt #8  to get work failed, and no other work to do.
Waiting before retry.
[16:42:27] + Attempting to get work packet
[16:42:27] Passkey found
[16:42:27] Gpu type=1 species=4.
[16:42:27] - Connecting to assignment server
[16:42:29] + No appropriate work server was available; will try again in a bit.
[16:42:29] + Couldn't get work instructions.
[16:42:29] - Attempt #9  to get work failed, and no other work to do.
Waiting before retry.
[17:03:52] + Attempting to get work packet
[17:03:52] Passkey found
[17:03:52] Gpu type=1 species=4.
[17:03:52] - Connecting to assignment server
[17:03:56] + No appropriate work server was available; will try again in a bit.
[17:03:56] + Couldn't get work instructions.
[17:03:56] - Attempt #10  to get work failed, and no other work to do.
Waiting before retry.
[17:46:39] + Attempting to get work packet
[17:46:39] Passkey found
[17:46:39] Gpu type=1 species=4.
[17:46:39] - Connecting to assignment server
[17:46:43] + No appropriate work server was available; will try again in a bit.
[17:46:43] + Couldn't get work instructions.
[17:46:43] - Attempt #11  to get work failed, and no other work to do.
Waiting before retry.
Here we go again - and this time I am not even able to send the completed work unit :( .
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: No appropriate work server was available [ATI]

Post by bruce »

That server was down from Mon Aug 16 09:00:11 PDT 2010 to 11:00 and you posted at 10:00 PDT. There is a second Work Server for ATI but it is currently out of WUs to assign.
Post Reply