Project: 5751 (Run 6, Clone 15, Gen 3)

Moderators: Site Moderators, FAHC Science Team

Post Reply
Alphax
Posts: 24
Joined: Tue Aug 26, 2008 2:51 pm
Hardware configuration: Vista Home Premium 32-bit
Intel Core2 Duo T7700@2.4GHz, 3GB DDR2
NVIDIA GeForce 8600M GT, 256MB DDR2, PCI-E x16, 178.24 drivers

Project: 5751 (Run 6, Clone 15, Gen 3)

Post by Alphax »

Haven't seen this one yet...

Code: Select all

[13:50:04] 
[13:50:04] *------------------------------*
[13:50:04] Folding@Home GPU Core - Beta
[13:50:04] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[13:50:04] 
[13:50:04] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[13:50:04] Build host: amoeba
[13:50:04] Board Type: Nvidia
[13:50:04] Core      : 
[13:50:04] Preparing to commence simulation
[13:50:04] - Looking at optimizations...
[13:50:04] - Files status OK
[13:50:04] - Expanded 98775 -> 492276 (decompressed 498.3 percent)
[13:50:04] Called DecompressByteArray: compressed_data_size=98775 data_size=492276, decompressed_data_size=492276 diff=0
[13:50:04] - Digital signature verified
[13:50:04] 
[13:50:04] Project: 5751 (Run 6, Clone 15, Gen 3)
<snip>
[16:44:28] Completed 67%
[16:55:56] Completed 68%
[17:07:25] Completed 69%
[17:10:55] Run: exception thrown during GuardedRun
[17:10:55] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[17:10:55] Going to send back what have done -- stepsTotalG=10000000
[17:10:55] Work fraction=0.6930 steps=10000000.
[17:10:59] logfile size=20425 infoLength=20425 edr=0 trr=23
[17:10:59] - Writing 20961 bytes of core data to disk...
[17:10:59] Done: 20449 -> 5155 (compressed to 25.2 percent)
[17:10:59]   ... Done.
[17:10:59] 
[17:10:59] Folding@home Core Shutdown: UNSTABLE_MACHINE
[17:11:03] CoreStatus = 7A (122)
[17:11:03] Sending work to server
[17:11:03] Project: 5751 (Run 6, Clone 15, Gen 3)
I have to say that it was running quite slowly compared to what a 5506 does - 640PPD vs. 1000-1100 - and was using about 100MB of RAM and producing noticeable graphics lag. Probably due to my lousy 8600M, which further reinforces my feeling that there needs to be a "low-capacity" option...
(Hardware info in profile)
toTOW
Site Moderator
Posts: 6432
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Project: 5751 (Run 6, Clone 15, Gen 3)

Post by toTOW »

This WU has been completed by someone else.
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Post Reply