Page 1 of 1

Project: 5014 (Run 1, Clone 313, Gen 19)

Posted: Sat Sep 27, 2008 5:19 am
by anko1
A bad WU? Another Special Exit, which it tries to resume and then EUE.

Code: Select all

[21:37:03] Project: 5014 (Run 1, Clone 313, Gen 19)
[21:37:03] 
[21:37:03] Assembly optimizations on if available.
[21:37:03] Entering M.D.
[21:37:10] Working on 576 p5005_supervillin_e1
[21:37:10] Client config found, loading data.
[21:37:10] Starting GUI Server
[21:39:06] Completed 1%
[21:41:03] Completed 2%
[21:42:59] Completed 3%
[21:44:54] Completed 4%
[21:46:50] Completed 5%
[21:48:47] Completed 6%
[21:50:40] Completed 7%
[21:52:37] Completed 8%
[21:54:34] Completed 9%
[21:56:30] Completed 10%
[21:58:27] Completed 11%
[22:00:08] Unit 5's deadline (September 26 19:16) has passed.
[22:00:20] - Autosending finished units... [September 26 22:00:20 UTC]
[22:00:20] Trying to send all finished work units
[22:00:20] + No unsent completed units remaining.
[22:00:20] - Autosend completed
[22:00:21] CoreStatus = 65 (101)
[22:00:21] Core internal error: SPECIAL_EXIT
[22:00:26] 
[22:00:26] + Processing work unit
[22:00:26] Core required: FahCore_11.exe
[22:00:26] Core found.
[22:00:26] Working on queue slot 03 [September 26 22:00:26 UTC]
[22:00:26] + Working ...
[22:00:26] - Calling '.\FahCore_11.exe -dir work/ -suffix 03 -priority 96 -checkpoint 15 -verbose -lifeline 2084 -version 620'

[22:00:26] 
[22:00:26] *------------------------------*
[22:00:26] Folding@Home GPU Core - Beta
[22:00:26] Version 1.09 (Fri Aug 1 11:46:54 PDT 2008)
[22:00:26] 
[22:00:26] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:00:26] Build host: amoeba
[22:00:26] Board Type: Nvidia
[22:00:26] Core      : 
[22:00:26] Preparing to commence simulation
[22:00:26] - Looking at optimizations...
[22:00:26] - Previous termination of core was improper.
[22:00:26] - Files status OK
[22:00:26] - Expanded 44101 -> 244433 (decompressed 554.2 percent)
[22:00:26] Called DecompressByteArray: compressed_data_size=44101 data_size=244433, decompressed_data_size=244433 diff=0
[22:00:26] - Digital signature verified
[22:00:26] 
[22:00:26] Project: 5014 (Run 1, Clone 313, Gen 19)
[22:00:26] 
[22:00:26] Entering M.D.
[22:00:32] Will resume from checkpoint file
[22:00:33] Working on 576 p5005_supervillin_e1
[22:00:33] Client config found, loading data.
[22:00:33] Resuming from checkpoint
[22:00:33] Gromacs cannot continue further.
[22:00:33] Going to send back what have done.
[22:00:33] Starting GUI Server
[22:00:34] logfile size: 24566 info=24566 bed=0 hdr=23
[22:00:34] - Writing 25102 bytes of core data to disk...
[22:00:34] Done: 24590 -> 5382 (compressed to 21.8 percent)
[22:00:34]   ... Done.
[22:00:34] 
[22:00:34] Folding@home Core Shutdown: EARLY_UNIT_END
[22:00:37] CoreStatus = 72 (114)
[22:00:37] Sending work to server
[22:00:37] Project: 5014 (Run 1, Clone 313, Gen 19)
[22:00:37] - Read packet limit of 540015616... Set to 524286976.


[22:00:37] + Attempting to send results [September 26 22:00:37 UTC]
[22:00:37] - Reading file work/wuresults_03.dat from core
[22:00:37]   (Read 5894 bytes from disk)
[22:00:37] Connecting to http://171.64.65.20:8080/
[22:00:37] Posted data.
[22:00:37] Initial: 0000; Conversation time very short, giving reduced weight in bandwidth avg
[22:00:37] - Uploaded at ~13 kB/s
[22:00:37] - Averaged speed for that direction ~46 kB/s
[22:00:37] + Results successfully sent

Re: Project: 5014 (Run 1, Clone 313, Gen 19)

Posted: Sat Sep 27, 2008 5:26 am
by anko1
Hmm, I think the Special Exit has to do with an expired WU. The same thing happened last time I had a Special Exit:

http://foldingforum.org/viewtopic.php?f ... 015#p57172