Page 1 of 1

Project: 3065 (Run 4, Clone 64, Gen 53)

Posted: Fri Jul 25, 2008 5:00 am
by Datsun 1600
Don't see the 3000 series very often, but this one went belly up and with 533 completed SMP WUs on this Boxen, stability is not an issue.

Datsun 1600

Code: Select all

[21:10:22] Completed 247500 out of 250000 steps  (99 percent)
[21:22:55] Writing local files
[21:22:56] Completed 250000 out of 250000 steps  (100 percent)
[21:22:56] Writing final coordinates.
[21:22:56] Past main M.D. loop
[21:22:57] Will end MPI now
[21:23:57] 
[21:23:57] Finished Work Unit:
[21:23:57] - Reading up to 21310704 from "work/wudata_04.arc": Read 21310704
[21:23:57] - Reading up to 553136 from "work/wudata_04.xtc": Read 553136
[21:23:57] goefile size: 0
[21:23:57] logfile size: 203294
[21:23:57] Leaving Run
[21:23:59] - Writing 22073506 bytes of core data to disk...
[21:24:00]   ... Done.
[21:24:00] - Failed to delete work/wudata_04.sas
[21:24:00] - Failed to delete work/wudata_04.goe
[21:24:00] Warning:  check for stray files
[21:24:00] - Shutting down core
[21:26:00] 
[21:26:00] Folding@home Core Shutdown: FINISHED_UNIT
[21:26:00] 
[21:26:00] Folding@home Core Shutdown: FINISHED_UNIT
[21:26:04] CoreStatus = 64 (100)
[21:26:04] Sending work to server


[21:26:04] + Attempting to send results
[21:38:26] + Results successfully sent
[21:38:26] Thank you for your contribution to Folding@Home.
[21:38:26] + Number of Units Completed: 533

[21:40:46] - Preparing to get new work unit...
[21:40:46] + Attempting to get work packet
[21:40:46] - Connecting to assignment server
[21:40:48] - Successful: assigned to (171.64.65.63).
[21:40:48] + News From Folding@Home: Welcome to Folding@Home
[21:40:48] Loaded queue successfully.
[21:41:08] + Closed connections
[21:41:08] 
[21:41:08] + Processing work unit
[21:41:08] Core required: FahCore_a1.exe
[21:41:08] Core found.
[21:41:08] Working on Unit 05 [July 24 21:41:08]
[21:41:08] + Working ...
[21:41:08] 
[21:41:08] *------------------------------*
[21:41:08] Folding@Home Gromacs SMP Core
[21:41:08] Version 1.74 (March 10, 2007)
[21:41:08] 
[21:41:08] Preparing to commence simulation
[21:41:08] - Ensuring status. Please wait.
[21:41:25] - Assembly optimizations manually forced on.
[21:41:25] - Not checking prior termination.
[21:41:27] - Expanded 1656642 -> 9524377 (decompressed 574.9 percent)
[21:41:27] - Starting from initial work packet
[21:41:27] 
[21:41:27] Project: 3065 (Run 4, Clone 64, Gen 53)
[21:41:27] 
[21:41:30] Assembly optimizations on if available.
[21:41:30] Entering M.D.
[21:41:36] Rejecting checkpoint
[21:41:37] lambda5_99sb_big
[21:41:37] Writing local files
[21:41:37] Extra SSE boost OK.
[21:41:37] 
[21:41:37] Extra SSE boost OK.
[21:41:37] Writing local files
[21:41:37] Completed 0 out of 2500000 steps  (0 percent)
[21:51:28] Writing local files
[21:51:28] Completed 25000 out of 2500000 steps  (1 percent)
[22:01:18] Writing local files
[22:01:18] Completed 50000 out of 2500000 steps  (2 percent)
[22:11:08] Writing local files
[22:11:08] Completed 75000 out of 2500000 steps  (3 percent)
[22:20:58] Writing local files
[22:20:58] Completed 100000 out of 2500000 steps  (4 percent)
[22:30:48] Writing local files
[22:30:48] Completed 125000 out of 2500000 steps  (5 percent)
[22:40:39] Writing local files
[22:40:39] Completed 150000 out of 2500000 steps  (6 percent)
[22:50:28] Writing local files
[22:50:29] Completed 175000 out of 2500000 steps  (7 percent)
[23:00:18] Writing local files
[23:00:18] Completed 200000 out of 2500000 steps  (8 percent)
[23:10:08] Writing local files
[23:10:08] Completed 225000 out of 2500000 steps  (9 percent)
[23:19:57] Writing local files
[23:19:57] Completed 250000 out of 2500000 steps  (10 percent)
[23:29:46] Writing local files
[23:29:46] Completed 275000 out of 2500000 steps  (11 percent)
[23:39:35] Writing local files
[23:39:35] Completed 300000 out of 2500000 steps  (12 percent)
[23:49:25] Writing local files
[23:49:25] Completed 325000 out of 2500000 steps  (13 percent)
[23:59:15] Writing local files
[23:59:15] Completed 350000 out of 2500000 steps  (14 percent)
[00:09:05] Writing local files
[00:09:05] Completed 375000 out of 2500000 steps  (15 percent)
[00:18:55] Writing local files
[00:18:55] Completed 400000 out of 2500000 steps  (16 percent)
[00:28:45] Writing local files
[00:28:45] Completed 425000 out of 2500000 steps  (17 percent)
[00:38:36] Writing local files
[00:38:36] Completed 450000 out of 2500000 steps  (18 percent)
[00:48:27] Writing local files
[00:48:27] Completed 475000 out of 2500000 steps  (19 percent)
[00:58:17] Writing local files
[00:58:17] Completed 500000 out of 2500000 steps  (20 percent)
[01:08:06] Writing local files
[01:08:06] Completed 525000 out of 2500000 steps  (21 percent)
[01:17:56] Writing local files
[01:17:56] Completed 550000 out of 2500000 steps  (22 percent)
[01:27:48] Writing local files
[01:27:48] Completed 575000 out of 2500000 steps  (23 percent)
[01:37:40] Writing local files
[01:37:40] Completed 600000 out of 2500000 steps  (24 percent)
[01:47:32] Writing local files
[01:47:32] Completed 625000 out of 2500000 steps  (25 percent)
[01:57:24] Writing local files
[01:57:24] Completed 650000 out of 2500000 steps  (26 percent)
[02:07:16] Writing local files
[02:07:16] Completed 675000 out of 2500000 steps  (27 percent)
[02:17:07] Writing local files
[02:17:07] Completed 700000 out of 2500000 steps  (28 percent)
[02:26:58] Writing local files
[02:26:58] Completed 725000 out of 2500000 steps  (29 percent)
[02:36:29] Warning:  long 1-4 interactions
[02:36:29] Quit 101 - NaN detected: (ener[20])
[02:36:29] 
[02:36:29] Simulation instability has been encountered. The run has entered a
[02:36:29]   state from which no further progress can be made.
[02:36:29] This may be the correct result of the simulation, however if you
[02:36:29]   often see other project units terminating early like this
[02:36:29]   too, you may wish to check the stability of your computer (issues
[02:36:29]   such as high temperature, overclocking, etc.).
[02:36:29] Going to send back what have done.
[02:36:29] logfile size: 26808
[02:36:29] - Writing 27358 bytes of core data to disk...
[02:36:29]   ... Done.
[02:36:29] - Failed to delete work/wudata_05.xtc
[02:36:29] No C.P. to delete.
[02:36:29] Warning:  check for stray files
[02:38:29] 
[02:38:29] Folding@home Core Shutdown: EARLY_UNIT_END
[02:38:29] 
[02:38:29] Folding@home Core Shutdown: EARLY_UNIT_END
[02:38:32] CoreStatus = 7B (123)
[02:38:32] Client-core communications error: ERROR 0x7b
[02:38:32] Deleting current work unit & continuing...
[02:40:52] - Preparing to get new work unit...
[02:40:52] + Attempting to get work packet
[02:40:52] - Connecting to assignment server
[02:40:55] - Successful: assigned to (171.64.65.64).
[02:40:55] + News From Folding@Home: Welcome to Folding@Home
[02:40:55] Loaded queue successfully.
[02:41:50] + Closed connections
[02:41:55] 
[02:41:55] + Processing work unit
[02:41:55] Core required: FahCore_a1.exe
[02:41:55] Core found.
[02:41:55] Working on Unit 06 [July 25 02:41:55]
[02:41:55] + Working ...
[02:41:55] 
[02:41:55] *------------------------------*
[02:41:55] Folding@Home Gromacs SMP Core
[02:41:55] Version 1.74 (March 10, 2007)
[02:41:55] 
[02:41:55] Preparing to commence simulation
[02:41:55] - Ensuring status. Please wait.
[02:42:12] - Assembly optimizations manually forced on.
[02:42:12] - Not checking prior termination.
[02:42:26] - Expanded 4843180 -> 24810145 (decompressed 512.2 percent)
[02:42:26] - Starting from initial work packet
[02:42:26] 
[02:42:26] Project: 2665 (Run 2, Clone 972, Gen 35)
[02:42:26] 
[02:42:28] Assembly optimizations on if available.
[02:42:28] Entering M.D.
[02:42:34] Rejecting checkpoint
[02:42:36] Protein: HGG with glycosylations
[02:42:36] Writing local files
[02:42:44] Extra SSE boost OK.
[02:42:44] Writing local files
[02:42:44] Completed 0 out of 250000 steps  (0 percent)
[02:55:45] Writing local files
[02:55:45] Completed 2500 out of 250000 steps  (1 percent)
[03:08:46] Writing local files
[03:08:46] Completed 5000 out of 250000 steps  (2 percent)
[03:21:46] Writing local files
[03:21:46] Completed 7500 out of 250000 steps  (3 percent)
[03:34:47] Writing local files
[03:34:47] Completed 10000 out of 250000 steps  (4 percent)
[03:47:47] Writing local files
[03:47:48] Completed 12500 out of 250000 steps  (5 percent)
[04:00:48] Writing local files

Re: Project: 3065 (Run 4, Clone 64, Gen 53)

Posted: Fri Jul 25, 2008 10:29 am
by toTOW
No one was able to complete this WU ...

Maybe you could try qfix to send the partial results : viewtopic.php?f=8&t=191 ?

Re: Project: 3065 (Run 4, Clone 64, Gen 53)

Posted: Thu Jul 31, 2008 12:37 am
by Datsun 1600
It came back again and gave the same result, when do they pull the duds?

Datsun 1600

Code: Select all

[06:05:05] + Processing work unit
[06:05:05] Core required: FahCore_a1.exe
[06:05:05] Core found.
[06:05:05] Working on Unit 02 [July 30 06:05:05]
[06:05:05] + Working ...
[06:05:05] 
[06:05:05] *------------------------------*
[06:05:05] Folding@Home Gromacs SMP Core
[06:05:05] Version 1.74 (March 10, 2007)
[06:05:05] 
[06:05:05] Preparing to commence simulation
[06:05:05] - Ensuring status. Please wait.
[06:05:22] - Assembly optimizations manually forced on.
[06:05:22] - Not checking prior termination.
[06:05:24] - Expanded 1656642 -> 9524377 (decompressed 574.9 percent)
[06:05:24] - Starting from initial work packet
[06:05:24] 
[06:05:24] Project: 3065 (Run 4, Clone 64, Gen 53)
[06:05:24] 
[06:05:25] Assembly optimizations on if available.
[06:05:25] Entering M.D.
[06:05:31] Rejecting checkpoint
[06:05:31] Protein: 66728 p3065_lambda5_99sb_bigExtra SSE boost OK.
[06:05:31] 
[06:05:31] Extra SSE boost OK.
[06:05:31] Writing local files
[06:05:32] Completed 0 out of 2500000 steps  (0 percent)
[06:15:22] Writing local files
[06:15:22] Completed 25000 out of 2500000 steps  (1 percent)
[06:25:12] Writing local files
[06:25:12] Completed 50000 out of 2500000 steps  (2 percent)
[06:35:02] Writing local files
[06:35:02] Completed 75000 out of 2500000 steps  (3 percent)
[06:44:51] Writing local files
[06:44:51] Completed 100000 out of 2500000 steps  (4 percent)
[06:54:40] Writing local files
[06:54:41] Completed 125000 out of 2500000 steps  (5 percent)
[07:04:31] Writing local files
[07:04:31] Completed 150000 out of 2500000 steps  (6 percent)
[07:14:21] Writing local files
[07:14:21] Completed 175000 out of 2500000 steps  (7 percent)
[07:24:10] Writing local files
[07:24:11] Completed 200000 out of 2500000 steps  (8 percent)
[07:34:00] Writing local files
[07:34:00] Completed 225000 out of 2500000 steps  (9 percent)
[07:43:49] Writing local files
[07:43:49] Completed 250000 out of 2500000 steps  (10 percent)
[07:53:38] Writing local files
[07:53:38] Completed 275000 out of 2500000 steps  (11 percent)
[08:03:27] Writing local files
[08:03:27] Completed 300000 out of 2500000 steps  (12 percent)
[08:13:17] Writing local files
[08:13:17] Completed 325000 out of 2500000 steps  (13 percent)
[08:23:07] Writing local files
[08:23:07] Completed 350000 out of 2500000 steps  (14 percent)
[08:32:57] Writing local files
[08:32:57] Completed 375000 out of 2500000 steps  (15 percent)
[08:42:46] Writing local files
[08:42:46] Completed 400000 out of 2500000 steps  (16 percent)
[08:52:36] Writing local files
[08:52:36] Completed 425000 out of 2500000 steps  (17 percent)
[09:02:27] Writing local files
[09:02:27] Completed 450000 out of 2500000 steps  (18 percent)
[09:12:17] Writing local files
[09:12:17] Completed 475000 out of 2500000 steps  (19 percent)
[09:22:07] Writing local files
[09:22:07] Completed 500000 out of 2500000 steps  (20 percent)
[09:31:57] Writing local files
[09:31:57] Completed 525000 out of 2500000 steps  (21 percent)
[09:41:46] Writing local files
[09:41:46] Completed 550000 out of 2500000 steps  (22 percent)
[09:51:38] Writing local files
[09:51:38] Completed 575000 out of 2500000 steps  (23 percent)
[10:01:29] Writing local files
[10:01:29] Completed 600000 out of 2500000 steps  (24 percent)
[10:11:22] Writing local files
[10:11:22] Completed 625000 out of 2500000 steps  (25 percent)
[10:21:14] Writing local files
[10:21:14] Completed 650000 out of 2500000 steps  (26 percent)
[10:31:06] Writing local files
[10:31:06] Completed 675000 out of 2500000 steps  (27 percent)
[10:40:57] Writing local files
[10:40:57] Completed 700000 out of 2500000 steps  (28 percent)
[10:50:48] Writing local files
[10:50:48] Completed 725000 out of 2500000 steps  (29 percent)
[11:00:19] Warning:  long 1-4 interactions
[11:00:19] Quit 101 - NaN detected: (ener[20])
[11:00:19] 
[11:00:19] Simulation instability has been encountered. The run has entered a
[11:00:19]   state from which no further progress can be made.
[11:00:19] This may be the correct result of the simulation, however if you
[11:00:19]   often see other project units terminating early like this
[11:00:19]   too, you may wish to check the stability of your computer (issues
[11:00:19]   such as high temperature, overclocking, etc.).
[11:00:19] Going to send back what have done.
[11:00:19] logfile size: 26808
[11:00:19] - Writing 27358 bytes of core data to disk...
[11:00:19]   ... Done.
[11:00:19] - Failed to delete work/wudata_02.arc
[11:00:19] - Failed to delete work/wudata_02.xtc
[11:00:19] - Failed to delete work/wudata_02.bed
[11:00:19] - Failed to delete work/wudata_02.chk
[11:00:19] - Failed to delete work/wudata_02.sas
[11:00:19] Warning:  check for stray files
[11:00:19] 
[11:00:19] Folding@home Core Shutdown: EARLY_UNIT_END
[11:00:19] 
[11:00:19] Folding@home Core Shutdown: EARLY_UNIT_END
[11:00:23] CoreStatus = 7B (123)
[11:00:23] Client-core communications error: ERROR 0x7b
[11:00:23] Deleting current work unit & continuing...
[11:02:43] - Preparing to get new work unit...
[11:02:43] + Attempting to get work packet
[11:02:43] - Connecting to assignment server
[11:02:49] - Successful: assigned to (171.64.65.64).
[11:02:49] + News From Folding@Home: Welcome to Folding@Home
[11:02:49] Loaded queue successfully.
[11:03:44] + Closed connections
[11:03:49] 
[11:03:49] + Processing work unit
[11:03:49] Core required: FahCore_a1.exe
[11:03:49] Core found.
[11:03:49] Working on Unit 03 [July 30 11:03:49]
[11:03:49] + Working ...
[11:03:49] 
[11:03:49] *------------------------------*
[11:03:49] Folding@Home Gromacs SMP Core
[11:03:49] Version 1.74 (March 10, 2007)
[11:03:49] 
[11:03:49] Preparing to commence simulation
[11:03:49] - Ensuring status. Please wait.
[11:04:06] - Assembly optimizations manually forced on.
[11:04:06] - Not checking prior termination.
[11:04:19] - Expanded 4617759 -> 24111057 (decompressed 522.1 percent)
[11:04:19] - Starting from initial work packet
[11:04:19] 
[11:04:19] Project: 2665 (Run 1, Clone 480, Gen 36)

Re: Project: 3065 (Run 4, Clone 64, Gen 53)

Posted: Thu Jul 31, 2008 10:40 am
by toTOW
Did you use qfix as I suggested in previous post :?:

Re: Project: 3065 (Run 4, Clone 64, Gen 53)

Posted: Sat Aug 02, 2008 7:42 am
by Datsun 1600
Nope, but I am shutting the SMP Clients down slowly but surely.

It has come back again, same result, belly up.

Not real quick at pulling the duds are they?

Datsun 1600

Code: Select all

[01:44:45] + Attempting to send results
[01:57:09] + Results successfully sent
[01:57:09] Thank you for your contribution to Folding@Home.
[01:57:09] + Number of Units Completed: 542

[01:59:29] - Preparing to get new work unit...
[01:59:29] + Attempting to get work packet
[01:59:29] - Connecting to assignment server
[01:59:33] - Successful: assigned to (171.64.65.63).
[01:59:33] + News From Folding@Home: Welcome to Folding@Home
[01:59:33] Loaded queue successfully.
[01:59:56] + Closed connections
[01:59:56] 
[01:59:56] + Processing work unit
[01:59:56] Core required: FahCore_a1.exe
[01:59:56] Core found.
[01:59:56] Working on Unit 06 [August 2 01:59:56]
[01:59:56] + Working ...
[01:59:56] 
[01:59:56] *------------------------------*
[01:59:56] Folding@Home Gromacs SMP Core
[01:59:56] Version 1.74 (March 10, 2007)
[01:59:56] 
[01:59:56] Preparing to commence simulation
[01:59:56] - Ensuring status. Please wait.
[02:00:13] - Assembly optimizations manually forced on.
[02:00:13] - Not checking prior termination.
[02:00:15] - Expanded 1656642 -> 9524377 (decompressed 574.9 percent)
[02:00:15] - Starting from initial work packet
[02:00:15] 
[02:00:15] Project: 3065 (Run 4, Clone 64, Gen 53)
[02:00:15] 
[02:00:16] Assembly optimizations on if available.
[02:00:16] Entering M.D.
[02:00:22] Rejecting checkpoint
[02:00:23] lambda5_99sb_big
[02:00:23] Writing local files
[02:00:23] Extra SSE boost OK.
[02:00:23] 
[02:00:23] Extra SSE boost OK.
[02:00:23] Writing local files
[02:00:23] Completed 0 out of 2500000 steps  (0 percent)
[02:10:13] Writing local files
[02:10:13] Completed 25000 out of 2500000 steps  (1 percent)
[02:20:03] Writing local files
[02:20:03] Completed 50000 out of 2500000 steps  (2 percent)
[02:29:53] Writing local files
[02:29:53] Completed 75000 out of 2500000 steps  (3 percent)
[02:39:42] Writing local files
[02:39:42] Completed 100000 out of 2500000 steps  (4 percent)
[02:49:32] Writing local files
[02:49:32] Completed 125000 out of 2500000 steps  (5 percent)
[02:59:23] Writing local files
[02:59:23] Completed 150000 out of 2500000 steps  (6 percent)
[03:09:12] Writing local files
[03:09:12] Completed 175000 out of 2500000 steps  (7 percent)
[03:19:01] Writing local files
[03:19:01] Completed 200000 out of 2500000 steps  (8 percent)
[03:28:51] Writing local files
[03:28:51] Completed 225000 out of 2500000 steps  (9 percent)
[03:38:40] Writing local files
[03:38:40] Completed 250000 out of 2500000 steps  (10 percent)
[03:48:29] Writing local files
[03:48:29] Completed 275000 out of 2500000 steps  (11 percent)
[03:58:18] Writing local files
[03:58:18] Completed 300000 out of 2500000 steps  (12 percent)
[04:08:07] Writing local files
[04:08:07] Completed 325000 out of 2500000 steps  (13 percent)
[04:17:57] Writing local files
[04:17:58] Completed 350000 out of 2500000 steps  (14 percent)
[04:27:47] Writing local files
[04:27:47] Completed 375000 out of 2500000 steps  (15 percent)
[04:37:36] Writing local files
[04:37:37] Completed 400000 out of 2500000 steps  (16 percent)
[04:47:27] Writing local files
[04:47:27] Completed 425000 out of 2500000 steps  (17 percent)
[04:57:17] Writing local files
[04:57:17] Completed 450000 out of 2500000 steps  (18 percent)
[05:07:07] Writing local files
[05:07:08] Completed 475000 out of 2500000 steps  (19 percent)
[05:16:58] Writing local files
[05:16:58] Completed 500000 out of 2500000 steps  (20 percent)
[05:26:47] Writing local files
[05:26:47] Completed 525000 out of 2500000 steps  (21 percent)
[05:36:37] Writing local files
[05:36:37] Completed 550000 out of 2500000 steps  (22 percent)
[05:46:28] Writing local files
[05:46:28] Completed 575000 out of 2500000 steps  (23 percent)
[05:56:19] Writing local files
[05:56:19] Completed 600000 out of 2500000 steps  (24 percent)
[06:06:12] Writing local files
[06:06:12] Completed 625000 out of 2500000 steps  (25 percent)
[06:16:04] Writing local files
[06:16:04] Completed 650000 out of 2500000 steps  (26 percent)
[06:25:55] Writing local files
[06:25:55] Completed 675000 out of 2500000 steps  (27 percent)
[06:35:46] Writing local files
[06:35:47] Completed 700000 out of 2500000 steps  (28 percent)
[06:45:37] Writing local files
[06:45:37] Completed 725000 out of 2500000 steps  (29 percent)
[06:55:08] Warning:  long 1-4 interactions
[06:55:08] Quit 101 - NaN detected: (ener[20])
[06:55:08] 
[06:55:08] Simulation instability has been encountered. The run has entered a
[06:55:08]   state from which no further progress can be made.
[06:55:08] This may be the correct result of the simulation, however if you
[06:55:08]   often see other project units terminating early like this
[06:55:08]   too, you may wish to check the stability of your computer (issues
[06:55:08]   such as high temperature, overclocking, etc.).
[06:55:08] Going to send back what have done.
[06:55:08] logfile size: 26808
[06:55:08] - Writing 27358 bytes of core data to disk...
[06:55:08]   ... Done.
[06:55:08] - Failed to delete work/wudata_06.goe
[06:55:08] Warning:  check for stray files
[06:57:08] 
[06:57:08] Folding@home Core Shutdown: EARLY_UNIT_END
[06:57:08] 
[06:57:08] Folding@home Core Shutdown: EARLY_UNIT_END
[06:57:10] CoreStatus = 7B (123)
[06:57:10] Client-core communications error: ERROR 0x7b
[06:57:10] Deleting current work unit & continuing...
[06:59:30] - Preparing to get new work unit...
[06:59:30] + Attempting to get work packet
[06:59:30] - Connecting to assignment server
[06:59:34] - Successful: assigned to (171.64.65.64).
[06:59:34] + News From Folding@Home: Welcome to Folding@Home
[06:59:35] Loaded queue successfully.
[07:00:34] + Closed connections
[07:00:39] 
[07:00:39] + Processing work unit
[07:00:39] Core required: FahCore_a1.exe
[07:00:39] Core found.
[07:00:39] Working on Unit 07 [August 2 07:00:39]
[07:00:39] + Working ...
[07:00:39] 
[07:00:39] *------------------------------*
[07:00:39] Folding@Home Gromacs SMP Core
[07:00:39] Version 1.74 (March 10, 2007)
[07:00:39] 
[07:00:39] Preparing to commence simulation
[07:00:39] - Ensuring status. Please wait.
[07:00:56] - Assembly optimizations manually forced on.
[07:00:56] - Not checking prior termination.
[07:01:10] - Expanded 4815243 -> 24810145 (decompressed 515.2 percent)
[07:01:10] - Starting from initial work packet
[07:01:10] 
[07:01:10] Project: 2665 (Run 2, Clone 943, Gen 35)
[07:01:10] 
[07:01:12] Assembly optimizations on if available.
[07:01:12] Entering M.D.
[07:01:18] Rejecting checkpoint
[07:01:19] Protein: HGG with glycosylations
[07:01:19] Writing local files
[07:01:27] Extra SSE boost OK.
[07:01:28] Writing local files
[07:01:28] Completed 0 out of 250000 steps  (0 percent)
[07:14:32] Writing local files
[07:14:32] Completed 2500 out of 250000 steps  (1 percent)

Re: Project: 3065 (Run 4, Clone 64, Gen 53)

Posted: Sat Aug 02, 2008 10:58 am
by toTOW
If you don't do what we suggest ... there's nothing we can do to help you :(

Re: Project: 3065 (Run 4, Clone 64, Gen 53)

Posted: Sat Aug 02, 2008 12:03 pm
by Datsun 1600
I am only reporting the dud WUs. I am helping myself by shutting down the SMP Boxen and saving electricity by going with a few of the GPU Clients.

Datsun 1600