Hi.
Project: 12413 (Run 51, Clone 1, Gen 26) is running really slowly.
I don't remember other work units on this new computer in this project running more than about 7 hours. This WU looks like it will take the whole day.
Did I do anything wrong, and can I speed up the work unit? I'm running on 16 cores.
longest work unit to date.
Moderators: Site Moderators, FAHC Science Team
-
bikeaddict
- Posts: 192
- Joined: Sun May 03, 2020 1:20 am
Re: longest work unit to date.
How long a WU runs is not something I usually monitor since it varies so much between projects. Timeouts vary from 1-7 days on the current project list.
The Estimated PPD that is shown in FAHControl is what I use to evaluate performance of my hardware. My i7-13700K on Linux usually estimates 600-800K PPD, with occasional rare estimates of 500K and occasionally higher at 900K-1M PPD. Your i7-13700F should probably be within 85-90% of those numbers, maybe a bit lower on Windows.
The Estimated PPD that is shown in FAHControl is what I use to evaluate performance of my hardware. My i7-13700K on Linux usually estimates 600-800K PPD, with occasional rare estimates of 500K and occasionally higher at 900K-1M PPD. Your i7-13700F should probably be within 85-90% of those numbers, maybe a bit lower on Windows.
-
DarkFoss
- Posts: 103
- Joined: Fri Apr 16, 2010 11:43 pm
- Hardware configuration: AMD 5800X3D Asus ROG Strix X570-E Gaming WiFi II bios 5003 G-Skill TridentZ Neo 3600mhz Asrock Tachi RX 7900XTX Corsair rm850x psu Asus PG32UQXR EK Elite 360 D-rgb aio Win 11pro/Kubuntu 22.04.4 LTS UPS BX1500G
- Location: Galifrey
Re: longest work unit to date.
I've had cpu wu's that take over 36 hours to complete, tpf in excess of 36 minutes. 6-7 hours is nothing really.