project:6511 run:17 clone:238 gen:51 EUE after 18%
Posted: Thu Apr 21, 2011 11:14 pm
hope that the v7 log file entries are decipherable.
BTW, after the EUE, a new WU was downloaded, and Core 78 is chewing away on it. But, the end of the log shows a recurring set of attempts to upload the results (known problem). I'll do a manual "--dump 1" to stop the hammering of the servers.
22:36:11:Unit 01:Completed 45000 out of 250000 steps (18%)
22:36:26:Unit 01:Gromacs cannot continue further.
22:36:26:Unit 01:Going to send back what have done.
BTW, after the EUE, a new WU was downloaded, and Core 78 is chewing away on it. But, the end of the log shows a recurring set of attempts to upload the results (known problem). I'll do a manual "--dump 1" to stop the hammering of the servers.
22:36:11:Unit 01:Completed 45000 out of 250000 steps (18%)
22:36:26:Unit 01:Gromacs cannot continue further.
22:36:26:Unit 01:Going to send back what have done.
Code: Select all
*********************** Log Started 21/Apr/2011-19:03:12 ***********************
19:03:12:************************* Folding@home Client *************************
19:03:12: Website: http://folding.stanford.edu/
19:03:12: Copyright: (c) 2009,2010 Stanford University
19:03:12: Author: Joseph Coffland <joseph@cauldrondevelopment.com>
19:03:12: Args: --lifeline 3948
19:03:12: Config: C:/Documents and Settings/Admin/Application
19:03:12: Data/FAHClient/config.xml
19:03:12:******************************** Build ********************************
19:03:12: Version: 7.1.21
19:03:12: Date: Mar 23 2011
19:03:12: Time: 15:13:48
19:03:12: SVN Rev: 2883
19:03:12: Branch: fah/trunk/client
19:03:12: Compiler: Intel(R) C++ MSVC 1500 mode 1110
19:03:12: Options: /TP /nologo /EHa /wd4297 /wd4103 /wd1786 /Ox -arch:SSE
19:03:12: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qrestrict /MT
19:03:12: Platform: win32 XP
19:03:12: Bits: 32
19:03:12: Mode: Release
19:03:12:******************************* System ********************************
19:03:12: OS: Microsoft Windows XP Home Edition
19:03:12: CPU: Intel(R) Pentium(R) M processor 1.73GHz
19:03:12: CPU ID: GenuineIntel Family 6 Model 13 Stepping 8
19:03:12: CPUs: 1
19:03:12: Memory: 1.99GiB
19:03:12: Free Memory: 1.14GiB
19:03:12: Threads: WINDOWS_THREADS
19:03:12: GPUs: 0
19:03:12: CUDA: Not detected
19:03:12: On Battery: false
19:03:12: UTC offset: -7
19:03:12: PID: 3204
19:03:12: CWD: C:/Documents and Settings/Admin/Application Data/FAHClient
19:03:12:Win32 Service: false
19:03:12:***********************************************************************
19:03:12:<config>
19:03:12: <service-description v='Folding@home Client'/>
19:03:12: <service-restart v='true'/>
19:03:12: <service-restart-delay v='5000'/>
19:03:12:
19:03:12: <!-- Client Control -->
19:03:12: <cycle-rate v='4'/>
19:03:12: <cycles v='-1'/>
19:03:12: <data-directory v='.'/>
19:03:12: <exec-directory v='C:\Program Files\FAHClient'/>
19:03:12: <exit-when-done v='false'/>
19:03:12: <max-delay v='21600'/>
19:03:12: <min-delay v='60'/>
19:03:12: <threads v='4'/>
19:03:12:
19:03:12: <!-- Configuration -->
19:03:12: <config-rotate v='true'/>
19:03:12: <config-rotate-dir v='configs'/>
19:03:12: <config-rotate-max v='16'/>
19:03:12:
19:03:12: <!-- Debugging -->
19:03:12: <assignment-servers>
19:03:12: assign3.stanford.edu:8080 assign4.stanford.edu:80
19:03:12: </assignment-servers>
19:03:12: <capture-directory v='capture'/>
19:03:12: <capture-sockets v='false'/>
19:03:12: <debug-sockets v='false'/>
19:03:12: <exception-locations v='true'/>
19:03:12: <gpu-assignment-servers>
19:03:12: assign-GPU.stanford.edu:80 assign-GPU.stanford.edu:8080
19:03:12: </gpu-assignment-servers>
19:03:12: <stack-traces v='false'/>
19:03:12:
19:03:12: <!-- Error Handling -->
19:03:12: <max-slot-errors v='5'/>
19:03:12: <max-unit-errors v='5'/>
19:03:12:
19:03:12: <!-- FahCore Control -->
19:03:12: <checkpoint v='15'/>
19:03:12: <core-dir v='cores'/>
19:03:12: <core-priority v='idle'/>
19:03:12: <cpu-affinity v='false'/>
19:03:12: <cpu-usage v='100'/>
19:03:12: <no-assembly v='false'/>
19:03:12:
19:03:12: <!-- Folding Slot Configuration -->
19:03:12: <client-subtype v='STDCLI'/>
19:03:12: <client-type v='normal'/>
19:03:12: <cpu-species v='X86_PENTIUM_II'/>
19:03:12: <cpu-type v='X86'/>
19:03:12: <cpus v='1'/>
19:03:12: <extra-core-args v='-forceasm'/>
19:03:12: <gpu v='false'/>
19:03:12: <gpu-id v='0'/>
19:03:12: <max-packet-size v='normal'/>
19:03:12: <os-species v='WIN_XP'/>
19:03:12: <os-type v='WIN32'/>
19:03:12: <project-key v='0'/>
19:03:12: <smp v='false'/>
19:03:12:
19:03:12: <!-- Logging -->
19:03:12: <log v='log.txt'/>
19:03:12: <log-color v='false'/>
19:03:12: <log-crlf v='true'/>
19:03:12: <log-date v='false'/>
19:03:12: <log-debug v='true'/>
19:03:12: <log-domain v='false'/>
19:03:12: <log-header v='true'/>
19:03:12: <log-level v='true'/>
19:03:12: <log-no-info-header v='true'/>
19:03:12: <log-redirect v='false'/>
19:03:12: <log-rotate v='true'/>
19:03:12: <log-rotate-dir v='logs'/>
19:03:12: <log-rotate-max v='16'/>
19:03:12: <log-short-level v='false'/>
19:03:12: <log-simple-domains v='true'/>
19:03:12: <log-thread-id v='false'/>
19:03:12: <log-time v='true'/>
19:03:12: <log-to-screen v='true'/>
19:03:12: <log-truncate v='false'/>
19:03:12: <verbosity v='5'/>
19:03:12:
19:03:12: <!-- Process Control -->
19:03:12: <child v='false'/>
19:03:12: <daemon v='false'/>
19:03:12: <pid v='false'/>
19:03:12: <pid-file v='Folding@home Client.pid'/>
19:03:12: <respawn v='false'/>
19:03:12: <service v='false'/>
19:03:12:
19:03:12: <!-- Remote Command Server -->
19:03:12: <command-address v='0.0.0.0'/>
19:03:12: <command-allow v='127.0.0.1'/>
19:03:12: <command-allow-no-pass v='127.0.0.1'/>
19:03:12: <command-deny v='0.0.0.0/0'/>
19:03:12: <command-deny-no-pass v='0.0.0.0/0'/>
19:03:12: <command-port v='36330'/>
19:03:12: <password v=''/>
19:03:12:
19:03:12: <!-- Slot Control -->
19:03:12: <max-shutdown-wait v='60'/>
19:03:12: <pause-on-battery v='true'/>
19:03:12: <pause-on-start v='false'/>
19:03:12:
19:03:12: <!-- User Information -->
19:03:12: <machine-id v='0'/>
19:03:12: <passkey v='********************************'/>
19:03:12: <team v='0'/>
19:03:12: <user v='GreyWhiskers'/>
19:03:12:
19:03:12: <!-- Work Unit Control -->
19:03:12: <dump-after-deadline v='true'/>
19:03:12: <max-queue v='16'/>
19:03:12: <max-units v='0'/>
19:03:12: <next-unit-percentage v='99'/>
19:03:12:
19:03:12: <!-- Folding Slots -->
19:03:12: <slot id='0' type='UNIPROCESSOR'>
19:03:12: <client-type v='advanced'/>
19:03:12: </slot>
19:03:12:</config>
19:03:18:Enabled folding slot 00: READY uniprocessor
19:03:18:Started thread 1 on PID 3204
19:03:18:Started thread 3 on PID 3204
19:03:18:Started thread 4 on PID 3204
19:03:18:Started thread 5 on PID 3204
19:03:18:Started thread 6 on PID 3204
19:03:18:Starting Unit 01
19:03:19:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_78.fah/FahCore_78.exe" -dir 01 -suffix 01 -lifeline 3204 -version 701 -checkpoint 15 -forceasm
19:03:21:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1:1044
19:03:21:Started thread 7 on PID 3204
19:03:26:Started core on PID 3292
19:03:26:FahCore 0x78 started
19:03:26:Started thread 8 on PID 3204
19:03:27:Unit 01:
19:03:27:Unit 01:*------------------------------*
19:03:27:Unit 01:Folding@Home Gromacs Core
19:03:27:Unit 01:Version 1.90 (March 8, 2006)
19:03:27:Unit 01:
19:03:27:Unit 01:Preparing to commence simulation
19:03:27:Unit 01:- Ensuring status. Please wait.
19:03:29:Server connection id=2 on 0.0.0.0:36330 from 192.168.10.200:2216
19:03:29:Started thread 9 on PID 3204
19:03:44:Unit 01:- Assembly optimizations manually forced on.
19:03:44:Unit 01:- Not checking prior termination.
19:03:46:Unit 01:- Expanded 749239 -> 3749753 (decompressed 500.4 percent)
19:03:48:Unit 01:
19:03:48:Unit 01:Project: 6511 (Run 17, Clone 238, Gen 51)
19:03:48:Unit 01:
19:03:49:Unit 01:Assembly optimizations on if available.
19:03:49:Unit 01:Entering M.D.
19:04:13:Unit 01:(Starting from checkpoint)
19:04:13:Unit 01:Protein: UBIQUITIN MODEL4500 in water
19:04:13:Unit 01:
19:04:13:Unit 01:Writing local files
19:04:13:Unit 01:Completed 10000 out of 250000 steps (4%)
19:04:14:Unit 01:Extra SSE boost OK.
19:20:21:Unit 01:Writing local files
19:20:21:Unit 01:Completed 12500 out of 250000 steps (5%)
19:36:08:Unit 01:Writing local files
19:36:08:Unit 01:Completed 15000 out of 250000 steps (6%)
19:52:17:Unit 01:Writing local files
19:52:17:Unit 01:Completed 17500 out of 250000 steps (7%)
20:07:31:Unit 01:Writing local files
20:07:31:Unit 01:Completed 20000 out of 250000 steps (8%)
20:22:22:Unit 01:Writing local files
20:22:22:Unit 01:Completed 22500 out of 250000 steps (9%)
20:37:08:Unit 01:Writing local files
20:37:08:Unit 01:Completed 25000 out of 250000 steps (10%)
20:51:42:Unit 01:Writing local files
20:51:42:Unit 01:Completed 27500 out of 250000 steps (11%)
21:06:15:Unit 01:Writing local files
21:06:15:Unit 01:Completed 30000 out of 250000 steps (12%)
21:20:46:Unit 01:Writing local files
21:20:46:Unit 01:Completed 32500 out of 250000 steps (13%)
21:35:14:Unit 01:Writing local files
21:35:14:Unit 01:Completed 35000 out of 250000 steps (14%)
21:50:20:Unit 01:Writing local files
21:50:20:Unit 01:Completed 37500 out of 250000 steps (15%)
22:06:20:Unit 01:Writing local files
22:06:20:Unit 01:Completed 40000 out of 250000 steps (16%)
22:21:15:Unit 01:Writing local files
22:21:15:Unit 01:Completed 42500 out of 250000 steps (17%)
22:36:11:Unit 01:Writing local files
22:36:11:Unit 01:Completed 45000 out of 250000 steps (18%)
22:36:26:Unit 01:Gromacs cannot continue further.
22:36:26:Unit 01:Going to send back what have done.
22:36:26:Unit 01:logfile size: 24958
22:36:26:Unit 01:- Writing 25494 bytes of core data to disk...
22:36:26:Unit 01:Done: 24982 -> 5097 (compressed to 20.4 percent)
22:36:26:Unit 01: ... Done.
22:36:26:FahCore running Unit 01 returned: BAD_WORK_UNIT (114)
22:36:26:Sending unit results: id:01 state:SEND project:6511 run:17 clone:238 gen:51 core:0x78 unit:0x76fa15104db0670a003300ee0011196f
22:36:27:Unit 01: Uploading 5.48KiB
22:36:27:Connecting to 171.64.65.62:8080
22:36:27:WARNING: Exception: Failed to send results to work server: Failed to read response packet
22:36:27:Trying to send results to collection server
22:36:27:Connecting to assign3.stanford.edu:8080
22:36:27:Unit 01: Uploading 5.48KiB
22:36:27:Connecting to 171.67.108.25:8080
22:36:27:News: Welcome to Folding@Home
22:36:27:Assigned to work server 171.64.65.62
22:36:27:Requesting new work unit for slot 00: READY uniprocessor from 171.64.65.62
22:36:27:Connecting to 171.64.65.62:8080
22:36:27:Slot 00: Downloading 459.95KiB
22:36:28:WARNING: WorkServer connection failed on port 8080 trying 80
22:36:28:Connecting to 171.67.108.25:80
22:36:28:Slot 00: Download complete
22:36:28:Received Unit: id:00 state:DOWNLOAD project:6522 run:15 clone:89 gen:70 core:0x78 unit:0x574778bf4db0b16c00460059000f197a
22:36:28:Starting Unit 00
22:36:28:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_78.fah/FahCore_78.exe" -dir 00 -suffix 01 -lifeline 3204 -version 701 -checkpoint 15 -forceasm
22:36:28:Started core on PID 3744
22:36:28:FahCore 0x78 started
22:36:28:Started thread 10 on PID 3204
22:36:29:Unit 00:
22:36:29:Unit 00:*------------------------------*
22:36:29:Unit 00:Folding@Home Gromacs Core
22:36:29:Unit 00:Version 1.90 (March 8, 2006)
22:36:29:Unit 00:
22:36:29:Unit 00:Preparing to commence simulation
22:36:29:Unit 00:- Assembly optimizations manually forced on.
22:36:29:Unit 00:- Not checking prior termination.
22:36:29:ERROR: Exception: Failed to connect to 171.67.108.25:80: No connection could be made because the target machine actively refused it.
22:36:29:Unit 00:- Expanded 470478 -> 2293061 (decompressed 487.3 percent)
22:36:29:Unit 00:- Starting from initial work packet
22:36:29:Unit 00:
22:36:29:Unit 00:Project: 6522 (Run 15, Clone 89, Gen 70)
22:36:29:Unit 00:
22:36:29:Unit 00:Assembly optimizations on if available.
22:36:29:Unit 00:Entering M.D.
22:36:29:Sending unit results: id:01 state:SEND project:6511 run:17 clone:238 gen:51 core:0x78 unit:0x76fa15104db0670a003300ee0011196f
22:36:29:Unit 01: Uploading 5.48KiB
22:36:29:Connecting to 171.64.65.62:8080
22:36:29:WARNING: Exception: Failed to send results to work server: Failed to read response packet
22:36:29:Trying to send results to collection server
22:36:29:Unit 01: Uploading 5.48KiB
22:36:29:Connecting to 171.67.108.25:8080
22:36:30:WARNING: WorkServer connection failed on port 8080 trying 80
22:36:30:Connecting to 171.67.108.25:80
22:36:31:ERROR: Exception: Failed to connect to 171.67.108.25:80: No connection could be made because the target machine actively refused it.
22:36:35:Unit 00:Protein: TR462A_16 in water
22:36:35:Unit 00:
22:36:35:Unit 00:Writing local files
22:36:36:Unit 00:Extra SSE boost OK.
22:36:36:Unit 00:Writing local files
22:36:36:Unit 00:Completed 0 out of 250000 steps (0%)
22:37:29:Sending unit results: id:01 state:SEND project:6511 run:17 clone:238 gen:51 core:0x78 unit:0x76fa15104db0670a003300ee0011196f
22:37:30:Unit 01: Uploading 5.48KiB
22:37:30:Connecting to 171.64.65.62:8080
22:37:30:WARNING: Exception: Failed to send results to work server: Failed to read response packet
22:37:30:Trying to send results to collection server
22:37:30:Unit 01: Uploading 5.48KiB
22:37:30:Connecting to 171.67.108.25:8080
22:37:31:WARNING: WorkServer connection failed on port 8080 trying 80
22:37:31:Connecting to 171.67.108.25:80
22:37:32:ERROR: Exception: Failed to connect to 171.67.108.25:80: No connection could be made because the target machine actively refused it.
22:39:06:Sending unit results: id:01 state:SEND project:6511 run:17 clone:238 gen:51 core:0x78 unit:0x76fa15104db0670a003300ee0011196f
22:39:07:Unit 01: Uploading 5.48KiB
22:39:07:Connecting to 171.64.65.62:8080
22:39:07:WARNING: Exception: Failed to send results to work server: Failed to read response packet
22:39:07:Trying to send results to collection server
22:39:07:Unit 01: Uploading 5.48KiB
22:39:07:Connecting to 171.67.108.25:8080
22:39:08:WARNING: WorkServer connection failed on port 8080 trying 80
22:39:08:Connecting to 171.67.108.25:80
22:39:09:ERROR: Exception: Failed to connect to 171.67.108.25:80: No connection could be made because the target machine actively refused it.
22:41:44:Sending unit results: id:01 state:SEND project:6511 run:17 clone:238 gen:51 core:0x78 unit:0x76fa15104db0670a003300ee0011196f
22:41:44:Unit 01: Uploading 5.48KiB
22:41:44:Connecting to 171.64.65.62:8080
22:41:44:WARNING: Exception: Failed to send results to work server: Failed to read response packet
22:41:44:Trying to send results to collection server
22:41:44:Unit 01: Uploading 5.48KiB
22:41:44:Connecting to 171.67.108.25:8080
22:41:45:WARNING: WorkServer connection failed on port 8080 trying 80
22:41:45:Connecting to 171.67.108.25:80
22:41:46:ERROR: Exception: Failed to connect to 171.67.108.25:80: No connection could be made because the target machine actively refused it.