I have had a linux box folding for several months. I just installed Windows XP/Vista/7/2003/2008, System tray (Systray) client installer with optional viewer 6.23 on a Dell notebook running XP Home SP3.
I installed using my folding 'name' and Team number and the passkey I am using on the Linux box. I just finished setting it up a few minutes ago.
How can I be sure the two machines are not processing the same work? Can I assume they are not?
thank you in advance.
two computers folding
Moderators: Site Moderators, FAHC Science Team
-
7im
- Posts: 10189
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: two computers folding
Yes, so I don't really have to answer the other question.Can I assume they are not?
But, open the fahlog.txt file, and it will show the PRCG numbers for the work unit on each system. The numbers will be different, and that's how you know.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Re: two computers folding
Encouraging answer. I will check the logs. Thank you .. your help is appreciated.
Edited .. additional info
In looking at the two logs . both logs show the same machine number (1). Should I make the 'new' machine '2'?
New machine log says:
[22:46:08] Project: 6881 (Run 256, Clone 8, Gen 56) (P6881 R256 C8 G56 right?)
Old machine log says:
[19:17:25] Project: 6881 (Run 731, Clone 11, Gen 104) (P6881 R731 C11 G104 .. different from other machine)
[19:42:38] Project: 6881 (Run 731, Clone 11, Gen 104) (P6881 R731 C11 G104 .. different from other machine)
[00:05:13] Project: 6887 (Run 840, Clone 16, Gen 46) (P6887 R840 C16 G46 .. different from other machine)
so I guess I am OK(?).
Edited .. additional info
In looking at the two logs . both logs show the same machine number (1). Should I make the 'new' machine '2'?
New machine log says:
[22:46:08] Project: 6881 (Run 256, Clone 8, Gen 56) (P6881 R256 C8 G56 right?)
Old machine log says:
[19:17:25] Project: 6881 (Run 731, Clone 11, Gen 104) (P6881 R731 C11 G104 .. different from other machine)
[19:42:38] Project: 6881 (Run 731, Clone 11, Gen 104) (P6881 R731 C11 G104 .. different from other machine)
[00:05:13] Project: 6887 (Run 840, Clone 16, Gen 46) (P6887 R840 C16 G46 .. different from other machine)
so I guess I am OK(?).
-
PantherX
- Site Moderator
- Posts: 7020
- Joined: Wed Dec 23, 2009 9:33 am
- Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB
Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400 - Location: Land Of The Long White Cloud
- Contact:
Re: two computers folding
The Machine ID is for the F@H Clients on the same machine. Since you have two separate machines, with a single F@H Client installed, there isn't any issue.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Re: two computers folding
Thank you PantherX. I guess I am 'good to go' .. thanks to all the help I got. Thanks to both respondents.
This thread can be considered SOLVED and CLOSED. I do not see where to mark it so.
This thread can be considered SOLVED and CLOSED. I do not see where to mark it so.