Page 1 of 1
Project: 11272 (Run 9, Clone 98, Gen 14)
Posted: Thu Nov 04, 2010 5:18 pm
by KroontjesPen
Code: Select all
[15:13:17] Completed 250000 out of 250000 steps (100%)
[15:13:17] Writing final coordinates.
[15:13:17] Past main M.D. loop
[15:14:17]
[15:14:17] Finished Work Unit:
[15:14:17] - Reading up to 293712 from "work/wudata_03.arc": Read 293712
[15:14:17] - Reading up to 260328 from "work/wudata_03.xtc": Read 260328
[15:14:17] goefile size: 0
[15:14:17] logfile size: 22139
[15:14:17] Leaving Run
[15:14:20] - Writing 582087 bytes of core data to disk...
[15:14:21] Done: 581575 -> 559270 (compressed to 96.1 percent)
[15:14:21] ... Done.
[15:14:21] - Shutting down core
[15:14:21]
[15:14:21] Folding@home Core Shutdown: FINISHED_UNIT
[15:14:24] CoreStatus = 64 (100)
[15:14:24] Sending work to server
[15:14:24] Project: 11267 (Run 12, Clone 285, Gen 9)
[15:14:24] - Read packet limit of 540015616... Set to 524286976.
[15:14:24] + Attempting to send results [November 4 15:14:24 UTC]
[15:14:31] + Results successfully sent
[15:14:31] Thank you for your contribution to Folding@Home.
[15:14:31] + Number of Units Completed: 591
[15:14:35] - Preparing to get new work unit...
[15:14:35] + Attempting to get work packet
[15:14:35] - Connecting to assignment server
[15:14:36] - Successful: assigned to (171.67.108.33).
[15:14:36] + News From Folding@Home: Welcome to Folding@Home
[15:14:37] Loaded queue successfully.
[15:14:40] + Closed connections
[15:14:40]
[15:14:40] + Processing work unit
[15:14:40] Core required: FahCore_78.exe
[15:14:40] Core found.
[15:14:40] Working on queue slot 04 [November 4 15:14:40 UTC]
[15:14:40] + Working ...
[15:14:41]
[15:14:41] *------------------------------*
[15:14:41] Folding@Home Gromacs Core
[15:14:41] Version 1.90 (March 8, 2006)
[15:14:41]
[15:14:41] Preparing to commence simulation
[15:14:41] - Looking at optimizations...
[15:14:41] - Created dyn
[15:14:41] - Files status OK
[15:14:41] - Expanded 344750 -> 1742704 (decompressed 505.4 percent)
[15:14:41] - Starting from initial work packet
[15:14:41]
[15:14:41] Project: 11272 (Run 9, Clone 98, Gen 14)
[15:14:41]
[15:14:41] Assembly optimizations on if available.
[15:14:41] Entering M.D.
[15:14:47] Gromacs error.
[15:14:47]
[15:14:47] Folding@home Core Shutdown: UNKNOWN_ERROR
[15:14:51] CoreStatus = 79 (121)
[15:14:51] Client-core communications error: ERROR 0x79
[15:14:51] This is a sign of more serious problems, shutting down.
How can I start my client with a new WU. Its try to restart this over and over again.
Re: Project: 11272 (Run 9, Clone 98, Gen 14)
Posted: Thu Nov 04, 2010 5:26 pm
by Fahrenheit451
I would delete the FahCore_78.exe and change the machine ID. Then restart the client. You should get another WU.
Which client do you use?
Re: Project: 11272 (Run 9, Clone 98, Gen 14)
Posted: Thu Nov 04, 2010 6:24 pm
by KroontjesPen
I have deleted the FahCore_78.exe and change the machine ID to 3 from 1.
Still I received Project: 11272 (Run 9, Clone 98, Gen 14) again.
OS: Window Vista Home Premium 64 bits.
CPU: Intel Core Quad Q9550
RAM: 6 GB
Folding@Home Client Version 6.23
Code: Select all
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\admin\AppData\Roaming\Folding@home-x86
Arguments: -verbosity -9
[18:11:12] - Ask before connecting: No
[18:11:12] - User name: KroontjesPen (Team 92)
[18:11:12] - User ID: 3C7039CB5919BFE1
[18:11:12] - Machine ID: 3
[18:11:12]
[18:11:12] Loaded queue successfully.
[18:11:12] Initialization complete
[18:11:12]
[18:11:12] + Processing work unit
[18:11:12] Core required: FahCore_78.exe
[18:11:12] Core not found.
[18:11:12] - Core is not present or corrupted.
[18:11:12] - Attempting to download new core...
[18:11:12] + Downloading new core: FahCore_78.exe
[18:11:13] + 10240 bytes downloaded
[18:11:13] + 20480 bytes downloaded
[18:11:13] + 30720 bytes downloaded
[18:11:13] + 40960 bytes downloaded
[18:11:13] + 51200 bytes downloaded
[18:11:14] + 61440 bytes downloaded
[18:11:14] + 71680 bytes downloaded
[18:11:14] + 81920 bytes downloaded
[18:11:14] + 92160 bytes downloaded
[18:11:14] + 102400 bytes downloaded
[18:11:14] + 112640 bytes downloaded
[18:11:14] + 122880 bytes downloaded
[18:11:14] + 133120 bytes downloaded
[18:11:14] + 143360 bytes downloaded
[18:11:14] + 153600 bytes downloaded
[18:11:14] + 163840 bytes downloaded
[18:11:14] + 174080 bytes downloaded
[18:11:14] + 184320 bytes downloaded
[18:11:14] + 194560 bytes downloaded
[18:11:14] + 204800 bytes downloaded
[18:11:14] + 215040 bytes downloaded
[18:11:14] + 225280 bytes downloaded
[18:11:14] + 235520 bytes downloaded
[18:11:14] + 245760 bytes downloaded
[18:11:14] + 256000 bytes downloaded
[18:11:15] + 266240 bytes downloaded
[18:11:15] + 276480 bytes downloaded
[18:11:15] + 286720 bytes downloaded
[18:11:15] + 296960 bytes downloaded
[18:11:15] + 307200 bytes downloaded
[18:11:15] + 317440 bytes downloaded
[18:11:15] + 327680 bytes downloaded
[18:11:15] + 337920 bytes downloaded
[18:11:15] + 348160 bytes downloaded
[18:11:15] + 358400 bytes downloaded
[18:11:15] + 368640 bytes downloaded
[18:11:15] + 378880 bytes downloaded
[18:11:15] + 389120 bytes downloaded
[18:11:15] + 399360 bytes downloaded
[18:11:15] + 409600 bytes downloaded
[18:11:15] + 419840 bytes downloaded
[18:11:15] + 430080 bytes downloaded
[18:11:15] + 440320 bytes downloaded
[18:11:15] + 450560 bytes downloaded
[18:11:15] + 460800 bytes downloaded
[18:11:15] + 471040 bytes downloaded
[18:11:15] + 481280 bytes downloaded
[18:11:15] + 491520 bytes downloaded
[18:11:15] + 501760 bytes downloaded
[18:11:15] + 512000 bytes downloaded
[18:11:15] + 522240 bytes downloaded
[18:11:15] + 532480 bytes downloaded
[18:11:15] + 542720 bytes downloaded
[18:11:15] + 552960 bytes downloaded
[18:11:15] + 563200 bytes downloaded
[18:11:15] + 573440 bytes downloaded
[18:11:16] + 583680 bytes downloaded
[18:11:16] + 593920 bytes downloaded
[18:11:16] + 604160 bytes downloaded
[18:11:16] + 614400 bytes downloaded
[18:11:16] + 624640 bytes downloaded
[18:11:16] + 634880 bytes downloaded
[18:11:16] + 645120 bytes downloaded
[18:11:16] + 655360 bytes downloaded
[18:11:16] + 665600 bytes downloaded
[18:11:16] + 675840 bytes downloaded
[18:11:16] + 686080 bytes downloaded
[18:11:16] + 696320 bytes downloaded
[18:11:16] + 706560 bytes downloaded
[18:11:16] + 716800 bytes downloaded
[18:11:16] + 727040 bytes downloaded
[18:11:16] + 737280 bytes downloaded
[18:11:16] + 747520 bytes downloaded
[18:11:16] + 757760 bytes downloaded
[18:11:16] + 768000 bytes downloaded
[18:11:16] + 778240 bytes downloaded
[18:11:16] + 788480 bytes downloaded
[18:11:16] + 798720 bytes downloaded
[18:11:16] + 808960 bytes downloaded
[18:11:16] + 819200 bytes downloaded
[18:11:16] + 825633 bytes downloaded
[18:11:16] Verifying core Core_78.fah...
[18:11:16] Signature is VALID
[18:11:16]
[18:11:16] Trying to unzip core FahCore_78.exe
[18:11:16] Decompressed FahCore_78.exe (2338816 bytes) successfully
[18:11:21] + Core successfully engaged
[18:11:26]
[18:11:26] + Processing work unit
[18:11:26] Core required: FahCore_78.exe
[18:11:26] Core found.
[18:11:26] Working on queue slot 04 [November 4 18:11:26 UTC]
[18:11:26] + Working ...
[18:11:26]
[18:11:26] *------------------------------*
[18:11:26] Folding@Home Gromacs Core
[18:11:26] Version 1.90 (March 8, 2006)
[18:11:26]
[18:11:26] Preparing to commence simulation
[18:11:26] - Ensuring status. Please wait.
[18:11:43] - Looking at optimizations...
[18:11:43] - Working with standard loops on this execution.
[18:11:43] - Created dyn
[18:11:43] - Files status OK
[18:11:44] - Expanded 344750 -> 1742704 (decompressed 505.4 percent)
[18:11:44] - Starting from initial work packet
[18:11:44]
[18:11:44] Project: 11272 (Run 9, Clone 98, Gen 14)
[18:11:44]
[18:11:44] Entering M.D.
[18:11:50] Gromacs error.
[18:11:50]
[18:11:50] Folding@home Core Shutdown: UNKNOWN_ERROR
[18:11:53] CoreStatus = 79 (121)
[18:11:53] Client-core communications error: ERROR 0x79
[18:11:53] This is a sign of more serious problems, shutting down.
Re: Project: 11272 (Run 9, Clone 98, Gen 14)
Posted: Thu Nov 04, 2010 6:41 pm
by Fireball0236
Only changing the Machine ID won't help you. At the same time you need to delete the queue.dat file and the work folder (just make sure you have no finished WUs that still have to be sent).
~ Fireball0236
Re: Project: 11272 (Run 9, Clone 98, Gen 14)
Posted: Thu Nov 04, 2010 6:50 pm
by KroontjesPen
Sorry, I didn't now to delete that file. It is the first time that I have this problem.
The FahCore_78.exe for the 2nd time deleted and ID back to 1 and it is working.
Many thanks.
Code: Select all
[18:48:09] + 825633 bytes downloaded
[18:48:09] Verifying core Core_78.fah...
[18:48:09] Signature is VALID
[18:48:09]
[18:48:09] Trying to unzip core FahCore_78.exe
[18:48:09] Decompressed FahCore_78.exe (2338816 bytes) successfully
[18:48:14] + Core successfully engaged
[18:48:19]
[18:48:19] + Processing work unit
[18:48:19] Core required: FahCore_78.exe
[18:48:19] Core found.
[18:48:19] Working on queue slot 01 [November 4 18:48:19 UTC]
[18:48:19] + Working ...
[18:48:19]
[18:48:19] *------------------------------*
[18:48:19] Folding@Home Gromacs Core
[18:48:19] Version 1.90 (March 8, 2006)
[18:48:19]
[18:48:19] Preparing to commence simulation
[18:48:19] - Ensuring status. Please wait.
[18:48:36] - Looking at optimizations...
[18:48:36] - Working with standard loops on this execution.
[18:48:36] - Created dyn
[18:48:36] - Files status OK
[18:48:37] - Expanded 375371 -> 1809212 (decompressed 481.9 percent)
[18:48:37] - Starting from initial work packet
[18:48:37]
[18:48:37] Project: 11272 (Run 9, Clone 98, Gen 14)
[18:48:37]
[18:48:37] Entering M.D.
[18:48:43] Protein: 634 Abeta42_37dPro
[18:48:43]
[18:48:43] Writing local files
[18:49:28] Writing local files
[18:49:28] Completed 0 out of 250000 steps (0%)