Project: 6503 (Run 19, Clone 190, Gen 98) - EUE
Posted: Tue Aug 24, 2010 3:42 pm
EUE @ 38% with "Gromacs cannot continue further" message.
Just started folding on this system last night, only one successful, bigger, WU (out of the two total) prior to this problem so it might be a problem, stability, on my end if others have successfully crunched this one to 100%. I haven't crunched enough yet on this new system to vouch for its stability.
System Specs: Dell Laptop with T4400 (2.2GHz Pentium Dual Core) - 4GB Memory - Windows 7 Home
SMP2 Client but running it as a standard client on a single core.
Just started folding on this system last night, only one successful, bigger, WU (out of the two total) prior to this problem so it might be a problem, stability, on my end if others have successfully crunched this one to 100%. I haven't crunched enough yet on this new system to vouch for its stability.
System Specs: Dell Laptop with T4400 (2.2GHz Pentium Dual Core) - 4GB Memory - Windows 7 Home
SMP2 Client but running it as a standard client on a single core.
Code: Select all
# Windows CPU Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\smp2
Service: C:\smp2\Folding@home-Win32-x86.exe
Arguments: -svcstart -d C:\smp2 -verbosity 9
Launched as a service.
Entered C:\smp2 to do work.
[11:45:16] + Attempting to get work packet
[11:45:16] Passkey found
[11:45:16] - Will indicate memory of 4056 MB
[11:45:16] - Connecting to assignment server
[11:45:16] Connecting to http://assign.stanford.edu:8080/
[11:45:16] Posted data.
[11:45:16] Initial: 40AB; - Successful: assigned to (171.64.65.62).
[11:45:16] + News From Folding@Home: Welcome to Folding@Home
[11:45:17] Loaded queue successfully.
[11:45:17] Sent data
[11:45:17] Connecting to http://171.64.65.62:8080/
[11:45:17] Posted data.
[11:45:17] Initial: 0000; - Receiving payload (expected size: 521366)
[11:45:19] - Downloaded at ~254 kB/s
[11:45:19] - Averaged speed for that direction ~206 kB/s
[11:45:19] + Received work.
[11:45:19] Trying to send all finished work units
[11:45:19] + No unsent completed units remaining.
[11:45:19] + Closed connections
[11:45:19]
[11:45:19] + Processing work unit
[11:45:19] Core required: FahCore_78.exe
[11:45:19] Core found.
[11:45:19] Working on queue slot 02 [August 24 11:45:19 UTC]
[11:45:19] + Working ...
[11:45:19] - Calling '.\FahCore_78.exe -dir work/ -suffix 02 -nice 19 -checkpoint 15 -service -verbose -lifeline 4144 -version 630'
[11:45:19] *------------------------------*
[11:45:19] Folding@Home Gromacs Core
[11:45:19] Version 1.90 (March 8, 2006)
[11:45:19]
[11:45:19] Preparing to commence simulation
[11:45:19] - Looking at optimizations...
[11:45:19] - Created dyn
[11:45:19] - Files status OK
[11:45:20] - Expanded 520854 -> 2536325 (decompressed 486.9 percent)
[11:45:20] - Starting from initial work packet
[11:45:20]
[11:45:20] Project: 6503 (Run 19, Clone 190, Gen 98)
[11:45:20]
[11:45:20] Assembly optimizations on if available.
[11:45:20] Entering M.D.
[11:45:26] Protein: TR462_B_20 in water
[11:45:26]
[11:45:26] Writing local files
[11:45:26] Extra SSE boost OK.
[11:45:26] Writing local files
[11:45:26] Completed 0 out of 250000 steps (0%)
[11:51:13] Writing local files
[11:51:13] Completed 2500 out of 250000 steps (1%)
[11:57:01] Writing local files
--snip--
[15:25:40] Completed 95000 out of 250000 steps (38%)
[b][15:26:51] Gromacs cannot continue further.[/b]
[15:26:51] Going to send back what have done.
[15:26:51] logfile size: 0
[15:26:51] Warning: Core could not open logfile.
[15:26:51] - Writing 536 bytes of core data to disk...
[15:26:51] Done: 24 -> 69 (compressed to 287.5 percent)
[15:26:51] ... Done.
[15:26:51]
[15:26:51] Folding@home Core Shutdown: EARLY_UNIT_END
[15:26:53] CoreStatus = 72 (114)
[15:26:53] Sending work to server
[15:26:53] Project: 6503 (Run 19, Clone 190, Gen 98)
[15:26:53] - Read packet limit of 540015616... Set to 524286976.
[15:26:53] + Attempting to send results [August 24 15:26:53 UTC]
[15:26:53] - Reading file work/wuresults_02.dat from core
[15:26:53] (Read 581 bytes from disk)
[15:26:53] Connecting to http://171.64.65.62:8080/
[15:26:54] Posted data.
[15:26:54] Initial: 0000; - Uploaded at ~1 kB/s
[15:26:54] - Averaged speed for that direction ~71 kB/s
[15:26:54] + Results successfully sent