Unable to upload to server 66.170.111.50

Moderators: Site Moderators, FAHC Science Team

ajm
Posts: 754
Joined: Sat Mar 21, 2020 5:22 am
Location: Lucerne, Switzerland

Re: Unable to upload to server 66.170.111.50

Post by ajm »

According to https://apps.foldingathome.org/serverstats, the server 66.170.111.50 has now sufficient disk place available (9+TiB). Your WU should be fine.
susanreads
Posts: 23
Joined: Sat Apr 04, 2020 7:57 pm

Re: Unable to upload to server 66.170.111.50

Post by susanreads »

Thanks, ajm!
Joe_H
Site Admin
Posts: 7856
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Unable to upload to server 66.170.111.50

Post by Joe_H »

susanreads wrote:I had this a few days ago, with the unit eventually being dumped. I've finished two different units since without a problem, then this morning I was assigned another unit for the same project, from the same work server. Can I expect the same thing to happen? I have to leave it running overnight in order to finish before the deadline, and I resent doing that if it's just going to be thrown away.
The server is back up, it has about 9 TB of free space now, so your WU should upload without problems.

Contrary to some statements in this topic, no WUs were sent out from this server from the time the space went away on the weekend starting late Saturday or early Sunday. Assignments started again late Monday.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
tigerpranke
Posts: 3
Joined: Mon Jan 06, 2020 7:03 pm

Re: Unable to upload to server 66.170.111.50

Post by tigerpranke »

Today I get the same response from 66.170.111.50 as ajm got from 140.163.4.200 :arrow: see Board index ‹ Stats and server issues ‹ Issues with a specific server ‹ 140.163.4.200 in trouble (can't post link):

Code: Select all

08:40:42:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:17407 run:0 clone:413 gen:288 core:0xa7 unit:0x0000019d00000120000043ff00000000
08:40:42:WU00:FS00:Uploading 9.93MiB to 66.170.111.50
08:40:42:WU00:FS00:Connecting to 66.170.111.50:8080
08:41:13:WARNING:WU00:FS00:Exception: Failed to send results to work server: 10002: Received short response, expected 512 bytes, got 0
ajm
Posts: 754
Joined: Sat Mar 21, 2020 5:22 am
Location: Lucerne, Switzerland

Re: Unable to upload to server 66.170.111.50

Post by ajm »

66.170.111.50 is now online, it loads snappily. http://fah-w1.vmware.com/
And this WU already has been credited to you (2021-03-20 03:13:37): https://apps.foldingathome.org/wu#proje ... 13&gen=288
tigerpranke
Posts: 3
Joined: Mon Jan 06, 2020 7:03 pm

Re: Unable to upload to server 66.170.111.50

Post by tigerpranke »

ajm wrote:66.170.111.50 is now online, it loads snappily. http://fah-w1.vmware.com/
And this WU already has been credited to you (2021-03-20 03:13:37): https://apps.foldingathome.org/wu#proje ... 13&gen=288
Thanks for the quick response. The client still tries to upload the WU:

Code: Select all

17:44:11:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:17407 run:0 clone:413 gen:288 core:0xa7 unit:0x0000019d00000120000043ff00000000
17:44:12:WU00:FS00:Uploading 9.93MiB to 66.170.111.50
17:44:12:WU00:FS00:Connecting to 66.170.111.50:8080
17:44:13:10:127.0.0.1:New Web session
17:44:42:WARNING:WU00:FS00:Exception: Failed to send results to work server: 10002: Received short response, expected 512 bytes, got 0
I think I have to delete the WU manually, as it looks like that is has been uploaded already.
Last edited by tigerpranke on Sat Mar 20, 2021 6:50 pm, edited 1 time in total.
Joe_H
Site Admin
Posts: 7856
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Unable to upload to server 66.170.111.50

Post by Joe_H »

Looks like some router or software is blocking or dropping the ACK packets coming back from the server when your client connects to upload. That could be local to your system, or just about anywhere in between over the network connection to that server. If your client does not get the AK when it uploads, it just keeps trying to send. If it doesn't get the other version of the ACK message that the server already has the WU, the same happens until the WU is either removed from the client manually, or it reaches the final deadline and gets removed automatically.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
tigerpranke
Posts: 3
Joined: Mon Jan 06, 2020 7:03 pm

Re: Unable to upload to server 66.170.111.50

Post by tigerpranke »

Thanks for the help. After all, it seems that the AV software (Bitdefender) started blocking ACK messages from 6.170.111.50, other work servers like 129.32.209.201 worked flawless.
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Unable to upload to server 66.170.111.50

Post by bruce »

How do you know it's bitdefender on your system? It could be on any router between you and the server.
goodyca
Posts: 187
Joined: Sun Dec 02, 2007 12:36 pm

Re: Unable to upload to server 66.170.111.50

Post by goodyca »

I have complete project:16701 run:147 clone:0 gen:116 that was received from the subject server. It repeatedly tries to upload and fails. The stats sever page indicates that it is out of disk space. Here is an example of the upload attempts:

Code: Select all

07:31:52:WU02:FS03:Uploading 65.22MiB to 66.170.111.50
07:31:52:WU02:FS03:Connecting to 66.170.111.50:8080
07:31:58:WU02:FS03:Upload 3.26%
07:32:04:WU02:FS03:Upload 6.90%
07:32:10:WU02:FS03:Upload 10.25%
07:32:16:WU02:FS03:Upload 13.70%
07:32:22:WU02:FS03:Upload 17.06%
07:32:28:WU02:FS03:Upload 20.51%
07:32:34:WU02:FS03:Upload 24.05%
07:32:40:WU02:FS03:Upload 27.50%
07:32:46:WU02:FS03:Upload 30.95%
07:32:52:WU02:FS03:Upload 34.31%
07:32:58:WU02:FS03:Upload 37.76%
07:33:04:WU02:FS03:Upload 41.30%
07:33:10:WU02:FS03:Upload 44.75%
07:33:16:WU02:FS03:Upload 48.11%
07:33:22:WU02:FS03:Upload 51.56%
07:33:28:WU02:FS03:Upload 54.91%
07:33:34:WU02:FS03:Upload 58.55%
07:33:40:WU02:FS03:Upload 61.91%
07:33:46:WU02:FS03:Upload 65.36%
07:33:52:WU02:FS03:Upload 68.81%
07:33:58:WU02:FS03:Upload 72.16%
07:34:04:WU02:FS03:Upload 75.61%
07:34:10:WU02:FS03:Upload 79.16%
07:34:16:WU02:FS03:Upload 82.61%
07:34:22:WU02:FS03:Upload 85.96%
07:34:28:WU02:FS03:Upload 89.41%
07:34:34:WU02:FS03:Upload 92.76%
07:34:40:WU02:FS03:Upload 96.41%
07:34:46:WU02:FS03:Upload 99.76%
07:34:47:WU02:FS03:Upload complete
07:34:47:WU02:FS03:Server responded PLEASE_WAIT (464)
07:34:47:WARNING:WU02:FS03:Failed to send results, will try again later
07:34:47:WU02:FS03:Sending unit results: id:02 state:SEND error:NO_ERROR project:16701 run:147 clone:0 gen:116 core:0x22 unit:0x00000000000000740000413d00000093

Joe_H
Site Admin
Posts: 7856
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Unable to upload to server 66.170.111.50

Post by Joe_H »

I have notified the person managing that server that it is out of space.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
TheWolf
Posts: 286
Joined: Thu Jan 24, 2008 10:34 am

Re: Unable to upload to server 66.170.111.50

Post by TheWolf »

66.170.111.50 and 128.252.203.10 the collection server both seem to be having problems excepting finished work units.
I have had one in a loop 24 times last night that couldn't send another 28 attempts today to send. Eating up my bandwidth
taking just over 6 mins. per try to send.
Points value has dropped from 350k+ to 206k ATM. Please get this problem fixed.
Why does this always seem to happen on a Friday & most times not fixed till Monday?
Post Reply