AMD dropping OpenCL support?

It seems that a lot of GPU problems revolve around specific versions of drivers. Though AMD has their own support structure, you can often learn from information reported by others who fold.

Moderators: Site Moderators, FAHC Science Team

JimF
Posts: 652
Joined: Thu Jan 21, 2010 2:03 pm

Re: AMD dropping OpenCL support?

Post by JimF »

This is interesting, since the new 21.40.1 drivers for Linux seem to be quite different.
https://www.amd.com/en/support/kb/relea ... ux-21-40-1

But the installation instructions say that they support OpenCl.
https://amdgpu-install.readthedocs.io/e ... all-script

I can try them out later for an RX 570 on Ubuntu 20.04.3.
Hopefully someone can get to them earlier.
Joe_H
Site Admin
Posts: 7856
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: AMD dropping OpenCL support?

Post by Joe_H »

Asghan wrote:With the RadeonPro 21.40 Beta driver AMD now confirmed that OpenCL will be dropped in favor of HIP.
21.40. does no longer include OpenCL. (see gpuopen.com)
Please provide a specific link, I suspect you are misreading a notice for a different software package than the drivers and OpenCL support.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
aetch
Posts: 447
Joined: Thu Jun 25, 2020 3:04 pm
Location: Between chair and keyboard

Re: AMD dropping OpenCL support?

Post by aetch »

I think they are referring to this article - https://gpuopen.com/blender-cycles-amd-gpu/

It seems like it could be misread as AMD dropping support for OpenCL.
It's not.
The way I read it, Blender uses a rendering engine called Cycles X. The article is claiming an upcoming version of Cycles X will be dropping support for OpenCL and is switching to HIP.
Folding Rigs - None (25-Jun-2022)

ImageImage
JimboPalmer
Posts: 2573
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: AMD dropping OpenCL support?

Post by JimboPalmer »

Blender is not even an AMD product.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
JimF
Posts: 652
Joined: Thu Jan 21, 2010 2:03 pm

Re: AMD dropping OpenCL support?

Post by JimF »

The 21.40.1 drivers work for me on an RX 570 (Ubuntu 20.04.3). I am folding on P18431 at 356 kPPD, so that is OpenCl enough.
Asghan
Posts: 9
Joined: Fri Sep 21, 2018 3:50 pm

Re: AMD dropping OpenCL support?

Post by Asghan »

I guess you might be right, let me check this again.

But from my side the even more important question (since OpenCL performance on AMD is very unreliable) :
Are there plans for an AMD HIP migration? This should deliver more performance on the same hardware (and hopefully more CONSTANT performance than AMD delivered the last months. Since the driver after 21.3.2 the OpenCL performance is just fucked up.)
Neil-B
Posts: 2027
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: AMD dropping OpenCL support?

Post by Neil-B »

Just as light reading ... https://techxplore.com/news/2021-04-ope ... uters.html ... https://github.com/openmm/openmm/pull/3338 ... I guess once AMD HIP is fully incorporated into OpenMM then this will then be a possibility for FaH - but from what I understand it will be for OpenMM to incorporate this as a first step.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
Asghan
Posts: 9
Joined: Fri Sep 21, 2018 3:50 pm

Re: AMD dropping OpenCL support?

Post by Asghan »

Neil-B wrote:Just as light reading ... https://techxplore.com/news/2021-04-ope ... uters.html ... https://github.com/openmm/openmm/pull/3338 ... I guess once AMD HIP is fully incorporated into OpenMM then this will then be a possibility for FaH - but from what I understand it will be for OpenMM to incorporate this as a first step.
Might be easy, as they can take their CUDA Code and use the AMD HIP converter AMD is already providing :)
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: AMD dropping OpenCL support?

Post by bruce »

I can envision the legal teams of AMD and NV in long, long uncomfortable meetings. NV uses CUDA as a powerful proprietary money-maker.
Neil-B
Posts: 2027
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: AMD dropping OpenCL support?

Post by Neil-B »

Asghan wrote:
Neil-B wrote:Just as light reading ... https://techxplore.com/news/2021-04-ope ... uters.html ... https://github.com/openmm/openmm/pull/3338 ... I guess once AMD HIP is fully incorporated into OpenMM then this will then be a possibility for FaH - but from what I understand it will be for OpenMM to incorporate this as a first step.
Might be easy, as they can take their CUDA Code and use the AMD HIP converter AMD is already providing :)
The second of those links I posted is the openmm dev github ... looks like work is ongoing ... there was another thread in there about initial work from a while back ... makes me feel it isn't that simple/quick ... but time will tell
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
Post Reply