Project: 8900 (Run 476, Clone 1, Gen 70)

Moderators: Site Moderators, FAHC Science Team

benj1989
Posts: 9
Joined: Wed Jan 16, 2008 3:21 am

Re: Project: 8900 (Run 476, Clone 1, Gen 70)

Post by benj1989 »

i would expect a 5870 to fold relatively nicely
if i compare performances in other tasks, i would say something like 8minutes/frame on these WU's with a 5870,
12.8 btw isn't a good driver for those ZETA wu's in terms of performance (at least not for me on my 7970)
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Project: 8900 (Run 476, Clone 1, Gen 70)

Post by 7im »

Read the Aug 31 post. Drivers were upgraded to 13.4. Lag is the issue now, not slow performance.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
ejsanyo
Posts: 20
Joined: Sat Mar 17, 2012 11:03 am

Re: Project: 8900 (Run 476, Clone 1, Gen 70)

Post by ejsanyo »

Okay, some weeks ago I was really bored to deal with those wrong drivers and GPUs. And I...just make a little upgrade to the newer HD7790 based videocard. :ewink: Now there is no jams, no troubles with the core 17. This GPU works perfect!
The best material model of a cat is another, or preferably the same, cat. ©Norbert Wiener
Post Reply