Project: 10516 (Run 2, Clone 191, Gen 99)

Moderators: Site Moderators, FAHC Science Team

Post Reply
sswilson
Posts: 90
Joined: Mon Dec 17, 2007 12:34 am
Hardware configuration: ASUS Crosshair IV Formula / AMD 1090T / 4X2 Gig GSkill Pi PC3-12800 / Corsair TX750W PSU / Sparkle GTX275 Plus / CoolerMaster Cosmos S / MCP655 WC Pump / MCR320 Rad / 6X Yate Loons / PA120.1 / 2X Scythe Ultra Kaze / Enzotech Luna WB / Dell Ultrasharp 2209WA

Gigabyte P35-DQ6 / Q6600 / 2X 1G 1066 Firestix / "Baked" XFX GTX 280 (RIP again :( ) / MSI GTS 450 Cyclone OC /PC P&C 750W Silencer / MCR220-QP-Res / DD DDCPX-Pro / Apogee GT / Highspeed PC Tech Station / Samsung 931BF / BenQ Q9T4
Location: Moncton, New Brunswick, Canada

Project: 10516 (Run 2, Clone 191, Gen 99)

Post by sswilson »

Code: Select all

[19:59:03] Completed 55%
[19:59:57] Completed 56%
[20:00:27] Run: exception thrown during GuardedRun
[20:00:27] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[20:00:27] Going to send back what have done -- stepsTotalG=15000000
[20:00:27] Work fraction=0.5656 steps=15000000.
[20:00:31] logfile size=0 infoLength=0 edr=0 trr=23
[20:00:31] + Opened results file
[20:00:31] - Writing 642 bytes of core data to disk...
[20:00:31] Done: 130 -> 127 (compressed to 97.6 percent)
[20:00:31]   ... Done.
[20:00:31] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp
[20:00:31] 
[20:00:31] Folding@home Core Shutdown: UNSTABLE_MACHINE
[20:00:34] CoreStatus = 7A (122)
[20:00:34] Sending work to server
[20:00:34] Project: 10516 (Run 2, Clone 191, Gen 99)



Considering this is one failure against 249 completed units since the client was started, I'm inclined to blame the WU. :) That said, if it's completed by somebody else, could just be one of those things.
toTOW
Site Moderator
Posts: 6435
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Project: 10516 (Run 2, Clone 191, Gen 99)

Post by toTOW »

Well, someone else completed the WU without issue ... but random computation errors can still happen depending on specific configuration elements ...
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
sswilson
Posts: 90
Joined: Mon Dec 17, 2007 12:34 am
Hardware configuration: ASUS Crosshair IV Formula / AMD 1090T / 4X2 Gig GSkill Pi PC3-12800 / Corsair TX750W PSU / Sparkle GTX275 Plus / CoolerMaster Cosmos S / MCP655 WC Pump / MCR320 Rad / 6X Yate Loons / PA120.1 / 2X Scythe Ultra Kaze / Enzotech Luna WB / Dell Ultrasharp 2209WA

Gigabyte P35-DQ6 / Q6600 / 2X 1G 1066 Firestix / "Baked" XFX GTX 280 (RIP again :( ) / MSI GTS 450 Cyclone OC /PC P&C 750W Silencer / MCR220-QP-Res / DD DDCPX-Pro / Apogee GT / Highspeed PC Tech Station / Samsung 931BF / BenQ Q9T4
Location: Moncton, New Brunswick, Canada

Re: Project: 10516 (Run 2, Clone 191, Gen 99)

Post by sswilson »

Just a Burp then. No biggie. Thanks for checking!
Post Reply